WTF re-re-format apparently

1 files changed, 128 insertions, 129 deletions

@@ -93,14 +93,14 @@ bollux() {
 bollux_args() {
         while getopts :hvq OPT; do
                 case "$OPT" in
-                (h)
+                h)
                         bollux_usage
                         exit
                         ;;
-                (v) BOLLUX_LOGLEVEL=DEBUG ;;
-                (q) BOLLUX_LOGLEVEL=QUIET ;;
-                (:) die 1 "Option -$OPTARG requires an argument" ;;
-                (*) die 1 "Unknown option: -$OPTARG" ;;
+                v) BOLLUX_LOGLEVEL=DEBUG ;;
+                q) BOLLUX_LOGLEVEL=QUIET ;;
+                :) die 1 "Option -$OPTARG requires an argument" ;;
+                *) die 1 "Unknown option: -$OPTARG" ;;
                 esac
         done
         shift $((OPTIND - 1))
@@ -142,16 +142,16 @@ bollux_config() {
         : "${BOLLUX_TIMEOUT:=30}"                      # connection timeout
         : "${BOLLUX_MAXREDIR:=5}"                      # max redirects
         : "${BOLLUX_PROTO:=gemini}"                    # default protocol
-        : "${BOLLUX_GEMINI_PORT:=1965}"                # default port for gemini
-        : "${BOLLUX_GOPHER_PORT:=70}"                  # default port for gopher
+        : "${BOLLUX_GEMINI_PORT:=1965}"                # default port for gemini
+        : "${BOLLUX_GOPHER_PORT:=70}"                  # default port for gopher
         : "${BOLLUX_URL:=}"                            # start url
         : "${BOLLUX_BYEMSG:=See You Space Cowboy ...}" # bye message
         ## lesskeys
         : "${KEY_OPEN:=o}"      # prompt for a link to open
         : "${KEY_GOTO:=g}"      # prompt for a page to 'goto'
         : "${KEY_GOTO_FROM:=G}" # goto a page with current prefilled
-        : "${KEY_BACK:=[}"    # go back in the history
-        : "${KEY_FORWARD:=]}" # go forward in the history
+        : "${KEY_BACK:=[}"      # go back in the history
+        : "${KEY_FORWARD:=]}"   # go forward in the history
         : "${KEY_REFRESH:=r}"   # refresh the page
         : "${KEY_CYCLE_PRE:=p}" # cycle T_PRE_DISPLAY
         : "${BOLLUX_CUSTOM_LESSKEY:=$BOLLUX_CONF_DIR/bollux.lesskey}"
@@ -252,24 +252,24 @@ run() { # run COMMAND...
 log() { # log LEVEL MESSAGE...
         # 'QUIET' means don't log anything.
         [[ "$BOLLUX_LOGLEVEL" == QUIET ]] && return
-        local fmt               # ANSI escape code
+        local fmt # ANSI escape code
 
         case "$1" in
-        ([dD]*)                 # Debug level -- only print if bollux -v.
+        [dD]*) # Debug level -- only print if bollux -v.
                 [[ "$BOLLUX_LOGLEVEL" == DEBUG ]] || return
-                fmt=34          # Blue
+                fmt=34 # Blue
                 ;;
-        ([eE]*)                 # Error level -- always print.
-                fmt=31          # Red
+        [eE]*)  # Error level -- always print.
+                fmt=31 # Red
                 ;;
-        (*)                     # Diagnostic level -- print unless QUIET.
-                fmt=1           # Bold
+        *)     # Diagnostic level -- print unless QUIET.
+                fmt=1 # Bold
                 ;;
         esac
         shift
 
         printf >&2 '\e[%sm%s:%-16s:\e[0m %s\n' \
-                   "$fmt" "$PRGN" "${FUNCNAME[${LOG_FUNC:-1}]}" "$*"
+                "$fmt" "$PRGN" "${FUNCNAME[${LOG_FUNC:-1}]}" "$*"
 }
 
 # Exit with an error and a message describing it.
@@ -298,10 +298,10 @@ list_cycle() { # list_cycle LIST<string> DELIM
         # T_PRE_DISPLAY, which is user-configurable.  I wanted it to be as easy
         # to configure for users who might not immediately know the bash array
         # syntax, but can figure out 'variable=value' without much thought.
-        local list="${!1}"               # Pass the list by name, not value
-        local delim="$2"                 # The delimiter of the string
+        local list="${!1}"               # Pass the list by name, not value
+        local delim="$2"                 # The delimiter of the string
         local first="${list%%${delim}*}" # The first element
-        local rest="${list#*${delim}}"   # The rest of the elements
+        local rest="${list#*${delim}}"   # The rest of the elements
         # -v prints to the variable specified.
         printf -v "$1" '%s%s%s' "${rest}" "${delim}" "${first}"
 }
@@ -325,7 +325,7 @@ prompt() { # prompt [-u] PROMPT [READ_ARGS...]
                 read_cmd+=(-i "$BOLLUX_URL")
                 shift
         fi
-        local prompt="$1"       # How to prompt the user
+        local prompt="$1" # How to prompt the user
         shift
         read_cmd+=(-p "$prompt> ")
         "${read_cmd[@]}" </dev/tty "$@"
@@ -423,11 +423,11 @@ usplit() { # usplit URL_ARRAY<name> URL
         # below performs a reverse lookup on the name to get the actual data.
         # shellcheck disable=2034
         local entire_url="${BASH_REMATCH[0]}" \
-              scheme="${BASH_REMATCH[2]}" \
-              authority="${BASH_REMATCH[4]}" \
-              path="${BASH_REMATCH[5]}" \
-              query="${BASH_REMATCH[7]}" \
-              fragment="${BASH_REMATCH[9]}"
+                scheme="${BASH_REMATCH[2]}" \
+                authority="${BASH_REMATCH[4]}" \
+                path="${BASH_REMATCH[5]}" \
+                query="${BASH_REMATCH[7]}" \
+                fragment="${BASH_REMATCH[9]}"
 
         # Iterate through the 5 components of a URL and assign them to elements
         # of URL_ARRAY, as follows:
@@ -516,10 +516,10 @@ ucblank() { # ucblank COMPONENT<name>
 # `ucset' sets one component of a URL array and setting the 0th element to the
 # new full URL.  Use it instead of directly setting the array element with U[x],
 # because U[0] will fall out of sync with the rest of the contents.
-ucset() { # ucset URL_ARRAY_INDEX<name> NEW_VALUE
+ucset() {                       # ucset URL_ARRAY_INDEX<name> NEW_VALUE
         local url_array_component="$1" # Of form 'URL_ARRAY[INDEX]'
         local value="$2"
-        
+
         # Assign $value to $url_array_component.
         #
         # Wrapped in an 'eval' for the extra layer of indirection.
@@ -538,8 +538,8 @@ uencode() { # uencode URL
         for ((i = 0; i < ${#1}; i++)); do
                 : "${1:i:1}"
                 case "$_" in
-                ([a-zA-Z0-9.~_-]) printf '%s' "$_" ;;
-                (*) printf '%%%02X' "'$_" ;;
+                [a-zA-Z0-9.~_-]) printf '%s' "$_" ;;
+                *) printf '%%%02X' "'$_" ;;
                 esac
         done
         printf '\n'
@@ -704,7 +704,6 @@ gemini_request() { # gemini_request URL
                 port="$BOLLUX_GEMINI_PORT"
         fi
 
-
         # Build the SSL command to request the resource.
         #
         # This is the beating heart of bollux, the command that does all the
@@ -716,12 +715,12 @@ gemini_request() { # gemini_request URL
                 # manual [9] it says not to use it, but who reads the manual,
                 # anyway?
                 openssl s_client
-                -crlf                          # Automatically add CR+LF to line
-                -quiet                         # Don't print all the cert stuff
+                -crlf  # Automatically add CR+LF to line
+                -quiet # Don't print all the cert stuff
                 # -ign_eof                     # `-quiet' implies `-ign_eof'
-                -connect "${url[2]}:$port"     # The server and port to connect
-                -servername "${url[2]}"        # SNI: Server Name Identification
-                -no_ssl3 -no_tls1 -no_tls1_1   # disable old TLS/SSL versions
+                -connect "${url[2]}:$port"   # The server and port to connect
+                -servername "${url[2]}"      # SNI: Server Name Identification
+                -no_ssl3 -no_tls1 -no_tls1_1 # disable old TLS/SSL versions
         )
 
         # Actually request the resource.
@@ -733,9 +732,9 @@ gemini_request() { # gemini_request URL
 
 # Handle the gemini response - see [3] Section 3.
 gemini_response() { # gemini_response URL
-        local code meta # received on the first line of the response
-        local title     # determined by a clunky heuristic, see read loop: (2*)
-        local url="$1"  # the currently-visited URL.
+        local code meta    # received on the first line of the response
+        local title        # determined by a clunky heuristic, see read loop: (2*)
+        local url="$1"     # the currently-visited URL.
 
         # Read the first line.
         #
@@ -751,7 +750,7 @@ gemini_response() { # gemini_response URL
         # `download', below), but I'm not sure how to remedy that issue either.
         # It requires more research.
         while read -t "$BOLLUX_TIMEOUT" -r code meta ||
-                        { (($? > 128)) && die 99 "Timeout."; }; do
+                { (($? > 128)) && die 99 "Timeout."; }; do
                 break
         done
         log d "[$code] $meta"
@@ -763,20 +762,20 @@ gemini_response() { # gemini_response URL
         # - I branch on the first digit of the status code, instead of both, to
         #   minimize the amount of duplicated code I need to write.
         case "$code" in
-        (1*) # INPUT
+        1*) # INPUT
                 # Gemini allows GET-style requests, and the INPUT family of
                 # response codes facilitate them.  `10' is for standard input,
                 # and `11' is for sensitive information, like passwords.
                 REDIRECTS=0
                 BOLLUX_URL="$url"
                 case "$code" in
-                (10) run prompt "$meta" ;;
-                (11) run prompt "$meta" -s ;; # sensitive input
+                10) run prompt "$meta" ;;
+                11) run prompt "$meta" -s ;; # sensitive input
                 esac
                 run history_append "$url" "${title:-}"
                 run blastoff "?$(uencode "$REPLY")"
                 ;;
-        (2*) # OK
+        2*) # OK
                 # The `20' family of requests is like HTTP's `200' family: it
                 # means that the request worked and the server is sending the
                 # requested content.
@@ -811,7 +810,7 @@ gemini_response() { # gemini_response URL
                         passthru
                 } | run display "$meta" "${title:-}"
                 ;;
-        (3*) # REDIRECT
+        3*) # REDIRECT
                 # Redirects are a fundamental part of any hypertext framework,
                 # and if I remember correctly, one of the main reasons
                 # solderpunk and others began thinking about gemini (the others
@@ -838,51 +837,51 @@ gemini_response() { # gemini_response URL
                 # will also be an option, however.
                 run blastoff "$meta" # TODO: confirm redirect
                 ;;
-        (4*) # TEMPORARY ERROR
+        4*) # TEMPORARY ERROR
                 # Since the 4* codes ([3] Appendix 1) are all server issues,
                 # bollux can treat them all basically the same.  This is an area
                 # that could use some expansion.
                 local desc="Temporary error"
                 case "$code" in
-                (41) desc+=" (server unavailable)" ;;
-                (42) desc+=" (CGI error)" ;;
-                (43) desc+=" (proxy error)" ;;
-                (44) desc+=" (slow down)" ;; # could be particularly improved
+                41) desc+=" (server unavailable)" ;;
+                42) desc+=" (CGI error)" ;;
+                43) desc+=" (proxy error)" ;;
+                44) desc+=" (slow down)" ;; # could be particularly improved
                 esac
                 REDIRECTS=0
                 die "$((100 + code))" "$desc [$code]: $meta"
                 ;;
-        (5*) # PERMANENT ERROR
+        5*) # PERMANENT ERROR
                 # The situation with the 5* codes is basically similar to the 4*
                 # codes.  It could maybe use more thought as to what behavior to
                 # implement.  Maybe adding the (bad) requests to history,
                 # subject to configuration?
                 local desc="Permanent failure"
                 case "$code" in
-                (51) desc+=" (not found)" ;;
-                (52) desc+=" (gone)" ;;
-                (53) desc+=" (proxy request refused)" ;;
-                # For some reason, codes 54--58 inclusive aren't used.
-                (59) desc+=" (bad request)" ;;
+                51) desc+=" (not found)" ;;
+                52) desc+=" (gone)" ;;
+                53) desc+=" (proxy request refused)" ;;
+                        # For some reason, codes 54--58 inclusive aren't used.
+                59) desc+=" (bad request)" ;;
                 esac
                 REDIRECTS=0
                 die "$((100 + code))" "$desc [$code]: $meta"
                 ;;
-        (6*) # CERTIFICATE ERROR (TODO)
+        6*) # CERTIFICATE ERROR (TODO)
                 # Dealing with certificates is honestly the most important
                 # feature missing from bollux to get it to 1.0.  Right now,
                 # bollux deals with 6* status codes identically to 4* and 5*
                 # codes.  This is not ideal, in the slightest.
                 local desc="Client certificate required"
                 case "$code" in
-                (61) desc+=" (certificate not authorized)" ;;
-                (62) desc+=" (certificate not valid)" ;;
+                61) desc+=" (certificate not authorized)" ;;
+                62) desc+=" (certificate not valid)" ;;
                 esac
                 REDIRECTS=0
                 log d "Not implemented: Client certificates"
                 die "$((100 + code))" "[$code] $meta"
                 ;;
-        (*) # UNKNOWN
+        *) # UNKNOWN
                 # Just in case we get a weird, un-spec-compliant status code.
                 [[ -z "${code-}" ]] && die 100 "Empty response code."
                 die "$((100 + code))" "Unknown response code: $code."
@@ -916,9 +915,9 @@ gopher_request() { # gopher_request URL
         # [7] Section 2.1
         [[ "$url" =~ gopher://([^/?#:]*)(:([0-9]+))?(/((.))?(/?.*))?$ ]]
         local server="${BASH_REMATCH[1]}" \
-              port="${BASH_REMATCH[3]:-$BOLLUX_GOPHER_PORT}" \
-              type="${BASH_REMATCH[6]:-1}" \
-              path="${BASH_REMATCH[7]}"
+                port="${BASH_REMATCH[3]:-$BOLLUX_GOPHER_PORT}" \
+                type="${BASH_REMATCH[6]:-1}" \
+                path="${BASH_REMATCH[7]}"
         log d "URL='$url' SERVER='$server' TYPE='$type' PATH='$path'"
 
         # Bash has this really neat feature where it can open a TCP socket
@@ -952,25 +951,25 @@ gopher_response() { # gopher_response URL
         # text-ish, it only concerns itself with those in this case statement.
         # All the others are simply downloaded.
         case "$type" in
-        (0) # Item is a file
+        0) # Item is a file
                 # Since gopher doesn't send MIME-type information in-band, we
                 # just assume it's text/plain, and try to convert it later to
                 # UTF-8 with `iconv'.
                 run display text/plain
                 ;;
-        (1) # Item is a directory [gophermap]
+        1) # Item is a directory [gophermap]
                 # Since I've already written all the code to typeset gemini
                 # well, it's easy to convert a gophermap to text/gemini and
                 # display it than to write a whole new gophermap typesetter.
                 run gopher_convert | run display text/gemini
                 ;;
-        (3) # Error
+        3) # Error
                 # I don't know all the gopher error cases, and the spec is
                 # pretty quiet on them.  So bollux just signals failure and
                 # bails.
                 die 203 "GOPHER: failed"
                 ;;
-        (7) # Item is an Index-Search server
+        7) # Item is an Index-Search server
                 # Gopher search queries are separated from their resources by a
                 # TAB.  It's wild.
                 if [[ "$url" =~ $'\t' ]]; then
@@ -980,7 +979,7 @@ gopher_response() { # gopher_response URL
                         run blastoff "$url      $REPLY"
                 fi
                 ;;
-        (*) # Anything else
+        *) # Anything else
                 # The list at [6] Section 3.8 includes the following (noted where it
                 # might be good to differently handle them in the future):
                 #
@@ -1030,19 +1029,19 @@ gopher_convert() {
                         continue
                 fi
                 case "$type" in
-                (.) # end of file
+                .) # end of file
                         printf '.\n'
                         break
                         ;;
-                (i) # label
+                i) # label
                         case "$label" in
-                        ('#'* | '*'[[:space:]]*)
+                        '#'* | '*'[[:space:]]*)
                                 if $pre; then
                                         printf '%s\n' '```'
                                         pre=false
                                 fi
                                 ;;
-                        (*)
+                        *)
                                 if ! $pre; then
                                         printf '%s\n' '```'
                                         pre=true
@@ -1051,28 +1050,28 @@ gopher_convert() {
                         esac
                         printf '%s\n' "$label"
                         ;;
-                (h) # html link
+                h) # html link
                         if $pre; then
                                 printf '%s\n' '```'
                                 pre=false
                         fi
                         printf '=> %s %s\n' "${path:4}" "$label"
                         ;;
-                (T) # telnet link
+                T) # telnet link
                         if $pre; then
                                 printf '%s\n' '```'
                                 pre=false
                         fi
                         printf '=> telnet://%s:%s/%s%s %s\n' \
-                               "$server" "$port" "$type" "$path" "$label"
+                                "$server" "$port" "$type" "$path" "$label"
                         ;;
-                (*) # other type
+                *) # other type
                         if $pre; then
                                 printf '%s\n' '```'
                                 pre=false
                         fi
                         printf '=> gopher://%s:%s/%s%s %s\n' \
-                               "$server" "$port" "$type" "$path" "$label"
+                                "$server" "$port" "$type" "$path" "$label"
                         ;;
                 esac
         done
@@ -1109,7 +1108,7 @@ display() { # display METADATA [TITLE]
         for ((i = 1; i <= "${#hdr[@]}"; i++)); do
                 h="${hdr[$i]}"
                 case "$h" in
-                (*charset=*) charset="${h#*=}" ;;
+                *charset=*) charset="${h#*=}" ;;
                 esac
         done
 
@@ -1119,7 +1118,7 @@ display() { # display METADATA [TITLE]
         log debug "mime='$mime'; charset='$charset'"
 
         case "$mime" in
-        (text/*)
+        text/*)
                 set_title "$title${title:+ - }bollux"
                 # Build the `less' command
                 less_cmd=(less)
@@ -1163,7 +1162,7 @@ display() { # display METADATA [TITLE]
                                 run "${less_cmd[@]}" && bollux_quit
                 } || run handle_keypress "$?"
                 ;;
-        (*) run download "$BOLLUX_URL" ;;
+        *) run download "$BOLLUX_URL" ;;
         esac
 }
 
@@ -1173,8 +1172,8 @@ less_prompt_escape() { # less_prompt_escape STRING
         for ((i = 0; i < ${#1}; i++)); do
                 : "${1:i:1}"
                 case "$_" in
-                ([\?:\.%\\]) printf '\%s' "$_" ;;
-                (*) printf '%s' "$_" ;;
+                [\?:\.%\\]) printf '\%s' "$_" ;;
+                *) printf '%s' "$_" ;;
                 esac
         done
         printf '\n'
@@ -1232,7 +1231,7 @@ typeset_gemini() {
 
         while IFS= read -r; do
                 case "$REPLY" in
-                ('```'*)
+                '```'*)
                         PRE_LINE_FORCE=false
                         if $pre; then
                                 pre=false
@@ -1240,28 +1239,28 @@ typeset_gemini() {
                                 pre=true
                         fi
                         case "${T_PRE_DISPLAY%%,*}" in
-                        (pre)
+                        pre)
                                 :
                                 ;;
-                        (alt | both)
+                        alt | both)
                                 $pre && PRE_LINE_FORCE=true \
-                                                      gemini_pre "${REPLY#\`\`\`}"
+                                        gemini_pre "${REPLY#\`\`\`}"
                                 ;;
                         esac
                         continue
                         ;;
-                ('=>'*)
+                '=>'*)
                         : $((ln += 1))
                         gemini_link "$REPLY" $pre "$ln"
                         ;;
-                ('#'*) gemini_header "$REPLY" $pre ;;
-                ('*'[[:space:]]*)
+                '#'*) gemini_header "$REPLY" $pre ;;
+                '*'[[:space:]]*)
                         gemini_list "$REPLY" $pre
                         ;;
-                ('>'*)
+                '>'*)
                         gemini_quote "$REPLY" $pre
                         ;;
-                (*) gemini_text "$REPLY" $pre ;;
+                *) gemini_text "$REPLY" $pre ;;
                 esac
         done
 }
@@ -1282,13 +1281,13 @@ gemini_link() {
                 printf "\e[${C_SIGIL}m%${S_MARGIN}s ${C_RESET}" "$s"
                 printf "\e[${C_LINK_NUMBER}m[%d]${C_RESET} " "$ln"
                 fold_line -n -B "\e[${C_LINK_TITLE}m" -A "${C_RESET}" \
-                          -l "$((${#ln} + 3))" -m "${T_MARGIN}" \
-                          "$WIDTH" "$(trim_string "$t")"
+                        -l "$((${#ln} + 3))" -m "${T_MARGIN}" \
+                        "$WIDTH" "$(trim_string "$t")"
                 fold_line -B " \e[${C_LINK_URL}m" \
-                          -A "${C_RESET}" \
-                          -l "$((${#ln} + 3 + ${#t}))" \
-                          -m "$((T_MARGIN + ${#ln} + 2))" \
-                          "$WIDTH" "$a"
+                        -A "${C_RESET}" \
+                        -l "$((${#ln} + 3 + ${#t}))" \
+                        -m "$((T_MARGIN + ${#ln} + 2))" \
+                        "$WIDTH" "$a"
         else
                 gemini_pre "$1"
         fi
@@ -1306,7 +1305,7 @@ gemini_header() {
 
                 printf "\e[${C_SIGIL}m%${S_MARGIN}s ${C_RESET}" "$s"
                 fold_line -B "\e[${hdrfmt}m" -A "${C_RESET}" -m "${T_MARGIN}" \
-                          "$WIDTH" "$t"
+                        "$WIDTH" "$t"
         else
                 gemini_pre "$1"
         fi
@@ -1321,7 +1320,7 @@ gemini_list() {
 
                 printf "\e[${C_SIGIL}m%${S_MARGIN}s ${C_RESET}" "$s"
                 fold_line -B "\e[${C_LIST}m" -A "${C_RESET}" -m "$T_MARGIN" \
-                          "$WIDTH" "$t"
+                        "$WIDTH" "$t"
         else
                 gemini_pre "$1"
         fi
@@ -1336,7 +1335,7 @@ gemini_quote() {
 
                 printf "\e[${C_SIGIL}m%${S_MARGIN}s ${C_RESET}" "$s"
                 fold_line -B "\e[${C_QUOTE}m" -A "${C_RESET}" -m "$T_MARGIN" \
-                          "$WIDTH" "$t"
+                        "$WIDTH" "$t"
         else
                 gemini_pre "$1"
         fi
@@ -1346,7 +1345,7 @@ gemini_text() {
         if ! ${2-false}; then
                 printf "%${S_MARGIN}s " ' '
                 fold_line -m "$T_MARGIN" \
-                          "$WIDTH" "$1"
+                        "$WIDTH" "$1"
         else
                 gemini_pre "$1"
         fi
@@ -1370,25 +1369,25 @@ fold_line() { # fold_line [OPTIONS...] WIDTH TEXT
         OPTIND=0
         while getopts nm:f:l:B:A: OPT; do
                 case "$OPT" in
-                (n) # -n = no trailing newline
+                n) # -n = no trailing newline
                         newline=false
                         ;;
-                (m) # -m MARGIN = margin for all lines
+                m) # -m MARGIN = margin for all lines
                         margin_all="$OPTARG"
                         ;;
-                (f) # -f MARGIN = margin for first line
+                f) # -f MARGIN = margin for first line
                         margin_first="$OPTARG"
                         ;;
-                (l) # -l LENGTH = length of line before starting fold
+                l) # -l LENGTH = length of line before starting fold
                         ll="$OPTARG"
                         ;;
-                (B) # -B BEFORE = text to insert before each line
+                B) # -B BEFORE = text to insert before each line
                         before="$OPTARG"
                         ;;
-                (A) # -A AFTER = text to insert after each line
+                A) # -A AFTER = text to insert after each line
                         after="$OPTARG"
                         ;;
-                (*) return 1 ;;
+                *) return 1 ;;
                 esac
         done
         shift "$((OPTIND - 1))"
@@ -1426,37 +1425,37 @@ fold_line() { # fold_line [OPTIONS...] WIDTH TEXT
 # use the exit code from less (see mklesskey) to do things
 handle_keypress() { # handle_keypress CODE
         case "$1" in
-        (48) # o - open a link -- show a menu of links on the page
+        48) # o - open a link -- show a menu of links on the page
                 run select_url "$BOLLUX_PAGESRC"
                 ;;
-        (49) # g - goto a url -- input a new url
+        49) # g - goto a url -- input a new url
                 prompt GO
                 run blastoff -u "$REPLY"
                 ;;
-        (50) # [ - back in the history
+        50) # [ - back in the history
                 run history_back || {
                         sleep 0.5
                         run blastoff "$BOLLUX_URL"
                 }
                 ;;
-        (51) # ] - forward in the history
+        51) # ] - forward in the history
                 run history_forward || {
                         sleep 0.5
                         run blastoff "$BOLLUX_URL"
                 }
                 ;;
-        (52) # r - re-request the current resource
+        52) # r - re-request the current resource
                 run blastoff "$BOLLUX_URL"
                 ;;
-        (53) # G - goto a url (pre-filled with current)
+        53) # G - goto a url (pre-filled with current)
                 run prompt -u GO
                 run blastoff -u "$REPLY"
                 ;;
-        (54) # ` - change alt-text visibility and refresh
+        54) # ` - change alt-text visibility and refresh
                 run list_cycle T_PRE_DISPLAY ,
                 run blastoff "$BOLLUX_URL"
                 ;;
-        (55) # 55-57 -- still available for binding
+        55) # 55-57 -- still available for binding
                 die "$?" "less(1) error"
                 ;;
         esac
@@ -1473,8 +1472,8 @@ select_url() { # select_url FILE
         PS3="OPEN> "
         select u in "${MAPFILE[@]}"; do
                 case "$REPLY" in
-                (q) bollux_quit ;;
-                ([^0-9]*) run blastoff -u "$REPLY" && break ;;
+                q) bollux_quit ;;
+                [^0-9]*) run blastoff -u "$REPLY" && break ;;
                 esac
                 run blastoff "${u%%[[:space:]]*}" && break
         done </dev/tty
@@ -1543,12 +1542,12 @@ history_append() { # history_append URL TITLE
 
         # Print the URL and its title (if given) to $BOLLUX_HISTFILE.
         local fmt=''
-        fmt+='%(%FT%T)T\t'      # %(_)T calls directly to 'strftime'.
-        if (( $# == 2 )); then
-                fmt+='%s\t'     # $url
-                fmt+='%s\n'     # $title
+        fmt+='%(%FT%T)T\t' # %(_)T calls directly to 'strftime'.
+        if (($# == 2)); then
+                fmt+='%s\t' # $url
+                fmt+='%s\n' # $title
         else
-                fmt+='%s%s\n'   # printf needs a field for every argument.
+                fmt+='%s%s\n' # printf needs a field for every argument.
         fi
         run printf -- "$fmt" -1 "$url" "$title" >>"$BOLLUX_HISTFILE"
 
@@ -1567,26 +1566,26 @@ history_back() {
         # one with each call to `history_append'.  If we subtract 1, we'll just
         # be at the end of the array again, reloading the page.
         ((HN -= 2))
-        
+
         if ((HN < 0)); then
                 HN=0
                 log e "Beginning of history."
                 return 1
         fi
-        
+
         run blastoff "${HISTORY[$HN]}"
 }
 
 # Move forward in session history.
 history_forward() {
         log d "HN=$HN"
-        
+
         if ((HN >= ${#HISTORY[@]})); then
                 HN="${#HISTORY[@]}"
                 log e "End of history."
                 return 1
         fi
-        
+
         run blastoff "${HISTORY[$HN]}"
 }
 
@@ -1646,8 +1645,8 @@ blastoff() { # blastoff [-u] URL
                         run "${url[1]}_response" "$url"
                 else
                         log d \
-                            "No response handler for '${url[1]}';" \
-                            " passing thru"
+                                "No response handler for '${url[1]}';" \
+                                " passing thru"
                         passthru
                 fi
         }