about summary refs log tree commit diff stats
path: root/ui-snapshot.c
Commit message (Collapse)AuthorAge
* ui-snapshot.c: Do not reinvent suffixcmp()Lukas Fleischer2014-01-10
| | | | | | | Use suffixcmp() from Git instead of reimplementing it. This is a preparation for moving to ends_with() in Git 1.8.6. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* Update copyright informationLukas Fleischer2014-01-08
| | | | | | | | | * Name "cgit Development Team" as copyright holder to avoid listing every single developer. * Update copyright ranges. Signed-off-by: Lukas Fleischer <cgit@crytocrack.de>
* cgit.c: Do not reset HOME after unsetting it.Jason A. Donenfeld2013-05-25
| | | | | | | | | | The number of odd cases in which git will try to read config is far too great to keep putting a bandaid over each one, so we'll just unset it. If it turns out that scripts really liked to know about $HOME, we can always reset it in the filter forks. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ui-snapshot: do not access $HOMEJason A. Donenfeld2013-04-30
| | | | | | | | | | | | It's a bit tedious to have to do this here too. If we encounter other issues with $HOME down the line, I'll look into adding some nice utility functions to handle this, or perhaps giving up on the hope that we could keep $HOME defined for scripts. This commit additionally adds a test case, should the issue surface again. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ui-snapshot.c: Prepend "V" when guessing ref namesLukas Fleischer2013-04-10
| | | | | | | | | In cgit_print_snapshot_links() we strip leading "v" and "V", while we currently only prepend a lower case "v" when parsing a snapshot file name. This results in broken snapshot links for tags that start with an upper case "V". Avoid this by prepending a "V" as a fallback. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* use struct strbuf instead of static buffersJohn Keeping2013-04-08
| | | | | | | | | | | | | | | | | | | Use "struct strbuf" from Git to remove the limit on file path length. Notes on scan-tree: This is slightly involved since I decided to pass the strbuf into add_repo() and modify if whenever a new file name is required, which should avoid any extra allocations within that function. The pattern there is to append the filename, use it and then reset the buffer to its original length (retaining a trailing '/'). Notes on ui-snapshot: Since write_archive modifies the argv array passed to it we copy the argv_array values into a new array of char* and then free the original argv_array structure and the new array without worrying about what the values now look like. Signed-off-by: John Keeping <john@keeping.me.uk>
* Convert cgit_print_error to a variadic functionJohn Keeping2013-04-08
| | | | | | | | | This removes many uses of "fmt" which uses a fixed size static pool of fixed size buffers. Instead of relying on these, we now pass around argument lists for as long as possible before using a strbuf to render content of an arbitrary size. Signed-off-by: John Keeping <john@keeping.me.uk>
* Always #include corresponding .h in .c filesJohn Keeping2013-04-08
| | | | | | | | | | | | While doing this, remove declarations from header files where the corresponding definition is declared "static" in order to avoid build errors. Also re-order existing headers in ui-*.c so that the file-specific header always comes immediately after "cgit.h", helping with future consistency. Signed-off-by: John Keeping <john@keeping.me.uk>
* Mark several functions/variables staticLukas Fleischer2013-03-04
| | | | | | Spotted by parsing the output of `gcc -Wmissing-prototypes [...]`. Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* ui-snapshot.c: Fill argv[0] with dummy.Jason A. Donenfeld2013-03-04
| | | | | | | | | parse_archive_args does not pass PARSE_OPT_KEEP_ARGV0 to parse_args, which means the first argument will be discarded, as though it were a function being called from the command-line. Thus, we fill argv[0] with a dummy argument to prevent this from happening. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* White space around control verbs.Jason A. Donenfeld2013-03-04
| | | | Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* Update git to v1.7.7.7John Keeping2013-03-02
| | | | | | | This release changes the archive interface so that we now need to pass argv into write_archive(). Signed-off-by: John Keeping <john@keeping.me.uk>
* ui-snapshot: pass -n to gzip, to suppress timestampJason A. Donenfeld2012-09-27
| | | | | | | | | | Since cgit snapshots of tags are often used for releases, we don't want the rarely used feature of the gzip compressor that includes an embedded timestamp into the archive, since this makes each tarball of the same (potentially signed) tag different. This commit refactors the archive handling code a bit so that each different format is able to run with an arbitrary argv for the filter.
* cgit.c: always setup cgit repo environment variablesLars Hjemli2011-06-13
| | | | | | | | | | | | When cgit learned to setup environment variables for certain repo settings before invoking a filter process, the setup occurred inside cgit_open_filter(). This patch moves the setup out of cgit_open_filter() and into prepare_repo_cmd() to prepare for additional uses of these variables. Reviewed-by: Ferry Huberts <mailings@hupie.com> Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Merge branch 'stable'Lars Hjemli2011-06-02
|\
| * ui-snapshot.c: remove debug cruftLars Hjemli2011-06-02
| | | | | | | | Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* | cgit_open_filter: also take the repo as a parameterFerry Huberts2011-03-26
|/ | | | | | | | To prepare for handing repo configuration to the filter script that is executed. Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl> Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Merge branch 'stable'Lars Hjemli2010-09-01
|\
| * ui-snapshot: actually compress zip archivesLars Hjemli2010-09-01
| | | | | | | | | | | | | | Since cgit linked with git-1.6.0 all zip archives has been uncompressed. This patch fixes the issue by specifying Z_DEFAULT_COMPRESSION. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* | Add .tar.xz-snapshot supportAndreas Wiese2009-12-08
|/ | | | Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* ui-snapshot: use cgit_{open|close}_filter() to execute compressorsLars Hjemli2009-07-31
| | | | | | | This simplifies the code in ui-snapshot.c and makes the test-suite verify the new filter-functions. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* ui-snapshot: avoid segfault when no filename is specifiedLars Hjemli2009-03-15
| | | | Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Merge branch 'snapshot-fixes'Lars Hjemli2009-01-11
|\
| * return 404 if snapshot is not foundNatanael Copa2008-12-28
| | | | | | | | Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* | ui-snapshot.c: change mime-type for tar.gz and tar.bz2Lars Hjemli2008-12-26
|/ | | | | | | The updated mime-types seems to work better than the old ones with both safari and firefox. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* ui-snapshot: improve extraction of revision from snapshot nameLars Hjemli2008-12-01
| | | | | | | | | | | | | | | The modified get_ref_from_filename() supports the following snapshot formats: * $REV.$EXT * $REPO[-_]*v?$REV.$EXT This implies that the following urls will retrieve the expected revision: * http://hjemli.net/git/cgit/snapshot/v0.8.1.tar.gz * http://hjemli.net/git/cgit/snapshot/0.8.1.tar.gz * http://hjemli.net/git/cgit/snapshot/cgit-0.8.1.tar.gz * http://hjemli.net/git/cgit/snapshot/cgit-140012d7a8.tar.gz Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Set prefix in snapshots when using dwimmeryNatanael Copa2008-11-30
| | | | | | | | | | This patch sets the directory prefix in archives to be the filename, excluding the suffix (.tar.gz, .tar.bz2 etc). The patch also removes the prefix parameter in cgit_print_snapshot() as the prefix might differ. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* ui-snapshot: add dwimmeryLars Hjemli2008-10-11
| | | | | | | | | | | | | | | When downloading a snapshot, the snapshot name will often contain the repo name combined with a tag. This patch tries to exploit this so that the correct revision is downloaded even if no specific revision is specified. PS: this only occurs if neither 'h' nor 'id' is specified in the query- string. PPS: this also fixes a bug which occurs when trying to download a filename with an unsupported suffix: it used to try to print an error message to the user but failed since it didn't prepare the output properly. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* ui-snapshot.c: specify archiver_args.baselenLars Hjemli2008-10-05
| | | | | | | | | | The struct member was introduces in git commit d53fe8187c38, but the cgit testsuite failed to detect that cgit always generated archives without prefixes, i.e. the result from cgit_repobasename was ignored. This fixes the bug and the testsuite. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Add ui-shared.hLars Hjemli2008-03-24
| | | | | | | This is finally a proper headerfile for the shared ui-functions which used to reside in cgit.h Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Refactor snapshot supportLars Hjemli2008-03-24
| | | | | | | | | The snapshot support needs to be split between output- and config-related functions to get the layering between shared.c and ui-*.c right. There is also some codestyle-issues which needs fixing to make the snapshot functions more similar to the rest of the cgit code. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Remove obsolete cacheitem parameter to ui-functionsLars Hjemli2008-03-24
| | | | | | This parameter hasn't been used for a very long time... Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Add struct cgit_page to cgit_contextLars Hjemli2008-03-24
| | | | | | | | This struct is used when generating http headers, and as such is another small step towards the goal of the whole cleanup series; to invoke each page/view function with a function pointer. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Introduce html.hLars Hjemli2008-03-18
| | | | | | | | All html-functions can be quite easily separated from the rest of cgit, so lets do it; the only issue was html_filemode which uses some git-defined macros so the function is moved into ui-shared.c::cgit_print_filemode(). Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Compare string lengths when parsing the snapshot maskLars Hjemli2007-12-03
| | | | | | | | | | We used to rely on the result from strncmp() without comparing the length of the strings involved. Even worse, any single-character format specifier would enable zip-format due to the optional '.'-prefix since the length of the mask then would become zero. Noticed-by: Evan Martin <sys@neugierig.org> Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* Set commit date on snapshot contentsLars Hjemli2007-11-11
| | | | | | | | The testsuite revealed that cgit snapshots don't set any useful timestamp on the files contained in the snapshot. Cherry-picked-from: 2ff33a8a0405b420cd75e0e207c7efeecd6f130b Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* ui-snapshot: whitespace/formatting cleanupLars Hjemli2007-07-23
| | | | | | | | Introduce a #define for number of snapshot archive entries, move all decls to function entrypoint, remove some trailing whitespace and reformat a few lines. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* cgit_print_snapshot_links: use url to specify snapshot nameLars Hjemli2007-07-23
| | | | Signed-off-by: Lars Hjemli <hjemli@gmail.com>
* allow selective enabling of snapshotsMichael Krelin2007-07-21
| | | | | | | | snapshot configuration parameter now can be a space/slash/comma/colon/semicolon/pipe-separated list of snaphot suffixes as listed in ui-snapshot.c Signed-off-by: Michael Krelin <hacker@klever.net>
* shorten snapshot names to repo basenameMichael Krelin2007-07-21
| | | | Signed-off-by: Michael Krelin <hacker@klever.net>
* added snapshot filename to the linkMichael Krelin2007-07-21
| | | | | | | - changed cgit_pageurl into cgit_fileurl with the filename parameter - rewritten cgit_pageurl as a wrapper around cgit_fileurl Signed-off-by: Michael Krelin <hacker@klever.net>
* add plain uncompressed tar snapshort formatMichael Krelin2007-07-21
| | | | | | time to make available snapshots selectable Signed-off-by: Michael Krelin <hacker@klever.net>
* introduced .tar.bz2 snapshotsMichael Krelin2007-07-21
| | | | | | | | | | | - reworked write_tar_gzip_archive to handle arbitrary filter as a write_compressed_tar_archive - reformatted whitespaces in the said function to adhere to common cgit standards - added wrappers around write_compressed_tar_archive for .tar.gz and .tar.bz2 - added a hint for vim to use 8 characters shift width by default Signed-off-by: Michael Krelin <hacker@klever.net>
* compress .tar.gz using gzip as a filterMichael Krelin2007-07-20
|
* add support for snapshot tarballsMichael Krelin2007-07-18
| | | | | | | - reworked cgit_print_snapshot to use a list of supported archivers and pick one for the suffix supplied - moved printing of snaphot links into ui-snapshot and make it iterate through the said list
* Add support for snapshotsLars Hjemli2007-02-08
Make a link from the commit viewer to a snapshot of the corresponding tree. Currently only zip-format is supported. Signed-off-by: Lars Hjemli <hjemli@gmail.com>
© 2022 C. Duckworth. generated by cgit. comments, issues, and patches welcome at < git at acdw dot net >.