path: root/config.org

#+TITLE: Emacs configuration, literate-style
#+AUTHOR: Case Duckworth
#+STARTUP: overview
#+PROPERTY: header-args :results output silent

* About me

#+begin_src emacs-lisp :noweb-ref settings
  (setq user-full-name "Case Duckworth"
        user-mail-address "acdw@acdw.net")
#+end_src

** Where I am

#+begin_src emacs-lisp :noweb-ref settings
  (setq calendar-location-name "Baton Rouge, LA"
        calendar-latitude 30.4
        calendar-longitude -91.1)
#+end_src

** Auth-sources

Here feels like as good a place as any to setup =auth-sources=.  Yes, I
/need/ to use GPG.  I'll get around to it.  Until then, /please/ don't
break into my workplace and steal my secrets.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default auth-sources '("~/.authinfo"))
#+end_src

* Look and feel

** Frames

*** Initial frame setup
:PROPERTIES:
:header-args: :noweb-ref early-init-frame
:END:

I tangle this section to =early-init.el=, since that's evaluated
before GUI set-up.  Which, in turn, means Emacs will skip the "flash
of unstyled content" thing.

**** Tool bar

#+begin_src emacs-lisp
  (add-to-list 'default-frame-alist
               '(tool-bar-lines . 0))

  (tool-bar-mode -1)
#+end_src

**** Menu bar

#+begin_src emacs-lisp
  (add-to-list 'default-frame-alist
               '(menu-bar-lines . 0))

  (menu-bar-mode -1)
#+end_src

**** Scroll bars

#+begin_src emacs-lisp
  (add-to-list 'default-frame-alist
               '(vertical-scroll-bars . nil)
               '(horizontal-scroll-bars . nil))

  (scroll-bar-mode -1)
  (horizontal-scroll-bar-mode -1)
#+end_src

**** Resizing

I don't want the frame to resize when I change fonts and stuff, and I
want it to resize by pixels -- we /are/ using a GUI, after all.

#+begin_src emacs-lisp
  (setq-default frame-inhibit-implied-resize t
                frame-resize-pixelwise t)
#+end_src

**** Don't show default modeline

Wait until my *fancy* modeline is loaded -- from [[https://github.com/KaratasFurkan/.emacs.d#remove-redundant-ui][Furkan Karataş]].

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default mode-line-format nil)
#+end_src

**** Window Dividers

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default window-divider-default-places t ; bottom and right
                window-divider-default-bottom-width 2
                window-divider-default-right-width 2)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (window-divider-mode +1)
#+end_src

*** Frame titles

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default frame-title-format
                (concat invocation-name "@" (system-name)
                        ": %b %+%+ %f"))
#+end_src

*** Fringes
:PROPERTIES:
:header-args: :noweb-ref settings
:END:

I have grown to love Emacs's little fringes on the side of the
windows.  In fact, I love them so much that I really went overboard
and have made a custom fringe bitmap.

**** Indicate empty lines after the end of the buffer

#+begin_src emacs-lisp
  (setq-default indicate-empty-lines t)
#+end_src

**** Indicate the boundaries of the buffer

#+begin_src emacs-lisp
  (setq-default indicate-buffer-boundaries 'right)
#+end_src

**** Indicate continuation lines, but only on the left fringe

#+begin_src emacs-lisp
  (setq-default visual-line-fringe-indicators '(left-curly-arrow nil))
#+end_src

**** Customize fringe bitmaps

***** Curly arrows (continuation lines)

#+begin_src emacs-lisp
  (define-fringe-bitmap 'left-curly-arrow
    [#b11000000
     #b01100000
     #b00110000
     #b00011000])

  (define-fringe-bitmap 'right-curly-arrow
    [#b00011000
     #b00110000
     #b01100000
     #b11000000])
#+end_src

***** Arrows (truncation lines)

#+begin_src emacs-lisp
  (define-fringe-bitmap 'left-arrow
    [#b00000000
     #b01010100
     #b01010100
     #b00000000])

  (define-fringe-bitmap 'right-arrow
    [#b00000000
     #b00101010
     #b00101010
     #b00000000])
#+end_src

*** COMMENT Nyan mode

+Fuck it, let's have some fun.+  COMMENTED out because it messes up my
modeline :(

This obviously needs a lot more research.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'nyan-mode)
#+end_src

I add it to the modeline [[*Simple modeline][below]].

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default nyan-bar-length 20)
#+end_src

But I still have to enable the mode ?!

#+begin_src emacs-lisp :noweb-ref settings
  (nyan-mode +1)
#+end_src

** Windows

*** Splitting windows sensibly

This is extremely fiddly and I'd love another option.
- [[https://www.emacswiki.org/emacs/ToggleWindowSplit][ToggleWindowSplit, EmacsWiki]]

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default split-width-threshold 100
                split-height-threshold 50)
#+end_src

*** Switch to other window or buffer                                   :crux:

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/map (kbd "M-o") #'crux-other-window-or-switch-buffer)
#+end_src

*** Visual fill column mode

In reading-intensive views, this mode keeps the text from getting too
wide.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'visual-fill-column)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default visual-fill-column-center-text t)
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'visual-line-mode-hook #'visual-fill-column-mode)

  (with-eval-after-load 'visual-fill-column
    (advice-add 'text-scale-adjust :after #'visual-fill-column-adjust))
#+end_src

*** The *Help* window

I want to select the *Help* window by default, so I can easily quit it.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default help-window-select t)
#+end_src



** Buffers

*** Uniquify buffers

The default way Emacs makes buffer names unique is really ugly and,
dare I say it, stupid.  Instead, I want them to be uniquified by their
filesystem paths.

#+begin_src emacs-lisp :noweb-ref requires
  (require 'uniquify)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default uniquify-buffer-name-style 'forward
                uniquify-separator "/"
                uniquify-after-kill-buffer-p t
                uniquify-ignore-buffers-re "^\\*")
#+end_src

*** Startup buffers

When Emacs starts up, I want a blank slate: the *scratch* buffer.  I
also want it to show a cute little message to myself.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default inhibit-startup-screen t ; Don't show that splash screen thing.
                initial-buffer-choice t  ; Start on *scratch*
                initial-scratch-message
                (concat ";; Howdy, "
                        (nth 0 (split-string user-full-name)) "!"
                        "  Welcome to Emacs."
                        "\n\n"))
#+end_src

*** Immortal =*scratch*= buffer

I don't want to accidentally kill the *scratch* buffer.  So, I add a
function to the =kill-buffer-query-functions= hook that will return
=nil= if the buffer is *scratch*.

#+begin_src emacs-lisp :noweb-ref functions
  (defun immortal-scratch ()
    (if (not (eq (current-buffer) (get-buffer "*scratch*")))
        t
      (bury-buffer)
      nil))
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'kill-buffer-query-functions #'immortal-scratch)
#+end_src

*** An /even better/ scratch buffer                                   :package:

The aptly-named =scratch= pops open a new scratch buffer /with the same
mode as the file you're currently editing/.  I'm pretty chuffed about
it.

I found it from [[https://old.reddit.com/r/emacs/comments/l4v1ux/one_of_the_most_useful_small_lisp_functions_in_my/][this discussion]], which might also come in handy
someday.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'scratch)
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/leader (kbd "C-x") #'scratch)
#+end_src

*** Kill buffers better

#+begin_src emacs-lisp :noweb-ref functions
  (defun kill-a-buffer (&optional prefix)
    "Kill a buffer and its window, prompting only on unsaved changes.

  `kill-a-buffer' uses the PREFIX argument to determine which buffer(s) to kill:
  0            => Kill current buffer & window
  4 (C-u)      => Kill OTHER buffer & window
  16 (C-u C-u) => Run `kill-buffer' without a prefix arg."
    (interactive "P")
    (pcase (or (car prefix) 0)
      (0 (kill-current-buffer)
         (unless (one-window-p) (delete-window)))
      (4 (other-window 1)
         (kill-current-buffer)
         (unless (one-window-p) (delete-window)))
      (16 (let ((current-prefix-arg nil))
            (kill-buffer)))))
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/map (kbd "C-x k") #'kill-a-buffer)
#+end_src

*** Kill old buffers after a while

Adapted from =midnight-mode=, using suggestions from [[https://old.reddit.com/r/emacs/comments/l6jpxf/how_do_emacs_users_usually_have_multiple_files/gl2249u/][u/ndamee]].

#+begin_src emacs-lisp :noweb-ref packages
  (require 'midnight)
#+end_src

What time I run the clean up is a little tricky for me, since I use
Emacs at work /and/ at home, and all at different times.  However, I
realized that since I close out of Emacs at work pretty much every
day, I don't need to worry about too many buffers there -- so I just
have =clean-buffer-list= run at 8:00 PM.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default acdw/clean-buffer-list-timer
                (run-at-time "20:00" 86400 #'clean-buffer-list)
                clean-buffer-list-delay-general 5
                clean-buffer-list-delay-special (* 7 24 60 60))

  (add-to-list 'clean-buffer-list-kill-buffer-names "*Completions*")
  (add-to-list 'clean-buffer-list-kill-buffer-names "*Calendar*")
#+end_src

** Cursor

*** Cursor shape

I like a vertical bar, but only in the selected window.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default cursor-type 'bar
                cursor-in-non-selected-windows nil)
#+end_src

*** Don't blink the cursor

#+begin_src emacs-lisp :noweb-ref modes
  (blink-cursor-mode -1)
#+end_src

** Tabs

*** Tab bar mode settings

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default tab-bar-show 1 ; show the tab bar when more than 1 tab
                tab-bar-new-tab-choice "*scratch*"
                tab-bar-tab-name-function
                #'tab-bar-tab-name-current-with-count)
#+end_src

*** Tab bar history

#+begin_src emacs-lisp :noweb-ref modes
  (tab-bar-history-mode +1)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default tab-bar-history-limit 25)
#+end_src

** Fonts

On Linux, I have a custom build of Iosevka that I like.

#+begin_src emacs-lisp :noweb-ref linux-specific
  (set-face-attribute 'default nil
                      :family "Iosevka Acdw"
                      :height 105)

  (set-face-attribute 'fixed-pitch nil
                      :family "Iosevka Acdw"
                      :height 105)
#+end_src

But on Windows, I use Consolas.

#+begin_src emacs-lisp :noweb-ref windows-specific
  (set-face-attribute 'default nil
                      :family "Consolas"
                      :height 110)

  (set-face-attribute 'fixed-pitch nil
                      :family "Consolas"
                      :height 110)
#+end_src

*** Underlines

I like the /fancy/ underlines in newer browsers that skip all the
descenders.  Emacs doesn't /quite/ have that, but it can put the
underline below all the text.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default x-underline-at-descent-line t)
#+end_src

*** Unicode fonts                                                   :package:

=unicode-fonts= pulls in some other packages that still require the
deprecated =cl= library.  So, I've forked those libraries to require
=cl-lib= instead.

**** First: un-fuck =font-utils= and =list-utils= ... and =persistent-soft=

***** List-utils

Since =font-utils= depends on =list-utils=, if I load the former first, it
pulls in the unpatched latter.  /So/ I need to do =list-utils= first.
(=*straight-process*= is your friend, y'all!)

Since =list-utils= requires =cl= in line 259 (see [[https://github.com/rolandwalker/list-utils/issues/6][this issue]], apparently
just changing it breaks many tests, but I'll run with it until Emacs
complains), I need to fork and change that to a =cl-lib=.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package '(list-utils
                          :host github
                          :repo "rolandwalker/list-utils"
                          :fork (:repo "duckwork/list-utils")))
#+end_src

***** Persistent-soft

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package '(persistent-soft
                          :host github
                          :repo "rolandwalker/persistent-soft"
                          :fork (:repo "duckwork/persistent-soft")))
#+end_src

***** Font-utils

I was able to actually create a [[https://github.com/rolandwalker/font-utils/pull/2][PR]] for this one, so fingers crossed.
Since the last update on =font-utils= was in 2015, I'm not super hopeful
that my fix will get merged upstream, but I'm using a =:fork= argument
to stay hopeful.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package '(font-utils
                          :host github
                          :repo "rolandwalker/font-utils"
                          :fork (:repo "duckwork/font-utils")))
#+end_src

***** A function in case it comes up again

I keep googling [[https://github.com/hlissner/doom-emacs/issues/3372][this Doom Emacs issue]], because I keep forgetting what
I need to do to see where =Package cl is deprecated= is coming from.
So... function!

#+begin_src emacs-lisp :noweb-ref functions
  ;; Make the compiler happy
  (autoload 'file-dependents "loadhist")
  (autoload 'feature-file "loadhist")

  (defun acdw/fucking-cl ()
    "Find out where the fuck `cl' is being required from."
    (interactive)
    (require 'loadhist)
    (message "%S" (file-dependents (feature-file 'cl))))
#+end_src

**** Unicode-fonts

/Okay/ ... pull requests in, time to load =unicode-fonts=.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package '(unicode-fonts
                          :host github
                          :repo "rolandwalker/unicode-fonts"))
  (require 'unicode-fonts)
#+end_src

According to [[https://github.com/rolandwalker/unicode-fonts/issues/3][Issue #3]], there can be problems with =unicode-fonts-setup=
when using a daemon.  Instead of forking this repo and merging [[https://github.com/rolandwalker/unicode-fonts/pull/4][PR #4]]
into my personal fork, I'll use the workaround described in the
issue.

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--unicode-fonts-setup (frame)
    "Run `unicode-fonts-setup', then remove the hook."
    (select-frame frame)
    (unicode-fonts-setup)
    (remove-hook 'after-make-frame-functions #'hook--unicode-fonts-setup))

  (add-hook 'after-make-frame-functions #'hook--unicode-fonts-setup)
#+end_src

*** Draw form-feeds (=^L=) properly                                   :package:

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'form-feed)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (global-form-feed-mode +1)
  (blackout 'form-feed-mode)
#+end_src

** Theming

*** Modus themes                                                    :package:

I want the git version.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package '(modus-themes
                          :host gitlab
                          :repo "protesilaos/modus-themes"))
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default modus-themes-slanted-constructs t
                modus-themes-bold-constructs t
                modus-themes-region 'bg-only
                modus-themes-org-blocks 'grayscale
                modus-themes-headings '((1 . line)
                                        (t . t))
                modus-themes-scale-headings nil
                modus-themes-mode-line 'borderless-3d)
#+end_src

*** Change themes based on time of day

#+begin_src emacs-lisp :noweb-ref functions
  (defun acdw/run-with-sun (sunrise-command sunset-command)
    "Run commands at sunrise and sunset."
    (let* ((times-regex (rx (* nonl)
                            (: (any ?s ?S) "unrise") " "
                            (group (repeat 1 2 digit) ":"
                                   (repeat 1 2 digit)
                                   (: (any ?a ?A ?p ?P) (any ?m ?M)))
                            (* nonl)
                            (: (any ?s ?S) "unset") " "
                            (group (repeat 1 2 digit) ":"
                                   (repeat 1 2 digit)
                                   (: (any ?a ?A ?p ?P) (any ?m ?M)))
                            (* nonl)))
           (ss (sunrise-sunset))
           (_m (string-match times-regex ss))
           (sunrise-time (match-string 1 ss))
           (sunset-time (match-string 2 ss)))
      (run-at-time sunrise-time (* 60 60 24) sunrise-command)
      (run-at-time sunset-time (* 60 60 24) sunset-command)))
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (acdw/run-with-sun #'modus-themes-load-operandi
                     #'modus-themes-load-vivendi)
#+end_src

*** Mode line

**** Simple modeline                                                :package:

After trying =doom-mode-line= and =smart-mode-line=, I think I've finally
landed on a good one: =simple-modeline=.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'simple-modeline)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default simple-modeline-segments
                '(;; left side
                  (simple-modeline-segment-modified
                   simple-modeline-segment-buffer-name
                   simple-modeline-segment-position)
                  ;; right side
                  (simple-modeline-segment-minor-modes
                   simple-modeline-segment-input-method
                   simple-modeline-segment-vc
                   simple-modeline-segment-misc-info
                   simple-modeline-segment-process
                   simple-modeline-segment-major-mode)))
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (simple-modeline-mode +1)
#+end_src

***** COMMENT Functions to figure out what window is focused

How is this not built into Emacs?  Oh well, I have [[https://github.com/jamesnvc/dotfiles/blob/master/emacs.d/modules/cogent-modeline.el][Cogent]] to thank.

#+begin_src emacs-lisp :noweb-ref variables
  (defvar cogent-line-selected-window (frame-selected-window))
#+end_src

#+begin_src emacs-lisp :noweb-ref functions
  (defun cogent-line-set-selected-window (&rest _args)
    (when (not (minibuffer-window-active-p (frame-selected-window)))
      (setq cogent-line-selected-window (frame-selected-window))
      (force-mode-line-update)))

  (defun cogent-line-unset-selected-window ()
    (setq cogent-line-selected-window nil)
    (force-mode-line-update))

  (defun cogent-line-selected-window-active-p ()
    (eq cogent-line-selected-window (selected-window)))
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'window-configuration-change-hook #'cogent-line-set-selected-window)
  (add-hook 'focus-in-hook #'cogent-line-set-selected-window)
  (add-hook 'focus-out-hook #'cogent-line-unset-selected-window)
  (advice-add 'handle-switch-frame :after #'cogent-line-set-selected-window)
  (advice-add 'select-window :after #'cogent-line-set-selected-window)
#+end_src

**** Blackout some modes                                            :package:

Like =diminish= or =delight=, =blackout= allows me to remove some
minor-modes from the modeline.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package '(blackout
                          :host github
                          :repo "raxod502/blackout"))
#+end_src

*** Setting faces

It took me a while to find a function that'll let me customize faces
/without/ using *customize*.  Thanks to [[https://www.emacswiki.org/emacs/CustomizingFaces#toc5][Drew Adams]], I've got it!

#+begin_src emacs-lisp :noweb-ref functions
  (defun doremi-face-set (face spec)
    "Tell Customize that FACE has been set to value SPEC.
    SPEC is as for `defface'."
    (put face 'customized-face spec)
    (face-spec-set face spec)
    (message "Customized face %s." (symbol-name face)))
#+end_src

* Interactivity

** Dialogs and alerts

*** Don't use a dialog box

Ask in the modeline instead.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default use-dialog-box nil)
#+end_src

*** Yes or no questions

I just want to type =y= or =n=, okay?

#+begin_src emacs-lisp :noweb-ref functions
  (fset 'yes-or-no-p #'y-or-n-p)
#+end_src

*** The Bell

The only system I /sort of/ like the bell on is my Thinkpad, which
does a little on-board speaker beep.  Until I can figure out how to
let it do its thing, though, I'll just change the bell on all my
systems.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default visible-bell nil
                ring-bell-function #'flash-mode-line)
#+end_src

**** Flash the mode-line

#+begin_src emacs-lisp :noweb-ref functions
  (defun flash-mode-line ()
    (invert-face 'mode-line)
    (run-with-timer 0.2 nil #'invert-face 'mode-line))
#+end_src

** Minibuffer

*** Keep the cursor away from the  minibuffer prompt

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default minibuffer-prompt-properties
                '(read-only t
                  cursor-intangible t
                  face minibuffer-prompt))
#+end_src

*** Enable a recursive minibuffer

#+begin_src emacs-lisp :noweb-ref
  (setq-default enable-recursive-minibuffers t)
#+end_src

*** Show the recursivity of the minibuffer in the mode-line

#+begin_src emacs-lisp :noweb-ref modes
  (minibuffer-depth-indicate-mode +1)
#+end_src

** Completing-read

*** Shadow file names

When typing =~= or =/= in the file-selection dialog, Emacs "pretends"
that you've typed them at the beginning of the line. By default,
however, it only /fades out/ the previous contents of the line. I want
to /hide/ those contents.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default file-name-shadow-properties '(invisible t))
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (file-name-shadow-mode +1)
#+end_src

*** Ignore case

#+begin_src emacs-lisp :noweb-ref
  (setq-default completion-ignore-case t
                read-buffer-completion-ignore-case t
                read-file-name-completion-ignore-case t)
#+end_src

*** Selectrum                                                       :package:

My minibuffer completion system uses =selectrum=, =prescient=, =company=,
and =marginalia=.  At some point, I'd like to take a deep dive in =embark=
(possibly switching out =selectrum=), =ido=, =orderless=, or others,
for now .... I just want to see my completions.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'selectrum)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (selectrum-mode +1)
#+end_src

*** Prescient                                                       :package:

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'prescient)
  (require 'prescient)
#+end_src

Prescient can persist itself too.

#+begin_src emacs-lisp :noweb-ref modes
  (prescient-persist-mode +1)
#+end_src

**** Selectrum integration

Let's have =prescient= and =selectrum= work together.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'selectrum-prescient)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (with-eval-after-load 'selectrum
    (selectrum-prescient-mode +1))
#+end_src

*** Consult                                                         :package:

#+begin_src emacs-lisp :noweb-ref modes
  (straight-use-package 'consult)
  (require 'consult)
#+end_src

Consult has a lot of great bindings that work well with Emacs's
default completion system.  These all come from the [[https://github.com/minad/consult#configuration][example configuration]].

#+begin_src emacs-lisp :noweb-ref bindings
  (with-eval-after-load 'consult
    ;; C-c bindings (`mode-specific-map')
    (define-key acdw/map (kbd "C-c h") #'consult-history)
    (define-key acdw/map (kbd "C-c m") #'consult-mode-command)
    ;; C-x bindings (`ctl-x-map')
    (define-key acdw/map (kbd "C-x M-:") #'consult-complex-command)
    (define-key acdw/map (kbd "C-x b") #'consult-buffer)
    (define-key acdw/map (kbd "C-x 4 b") #'consult-buffer-other-window)
    (define-key acdw/map (kbd "C-x 5 b") #'consult-buffer-other-frame)
    (define-key acdw/map (kbd "C-x r x") #'consult-register)
    (define-key acdw/map (kbd "C-x r b") #'consult-bookmark)
    ;; M-g bindings (`goto-map')
    (define-key acdw/map (kbd "M-g g") #'consult-line)
    (define-key acdw/map (kbd "M-g M-g") #'consult-line)
    (define-key acdw/map (kbd "M-g o") #'consult-outline)
    (define-key acdw/map (kbd "M-g m") #'consult-mark)
    (define-key acdw/map (kbd "M-g k") #'consult-global-mark)
    (define-key acdw/map (kbd "M-g i") #'consult-imenu)
    (define-key acdw/map (kbd "M-g e") #'consult-error)
    ;; M-s bindings (`search-map')
    (define-key acdw/map (kbd "M-s g") #'consult-grep) ; alts:
                                          ; consult-git-grep,
                                          ; consult-ripgrep
    (define-key acdw/map (kbd "M-s f") #'consult-find) ; alts:
                                          ; consult-locate
    (define-key acdw/map (kbd "M-s l") #'consult-line)
    (define-key acdw/map (kbd "M-s m") #'consult-multi-occur)
    (define-key acdw/map (kbd "M-s k") #'consult-keep-lines)
    (define-key acdw/map (kbd "M-s u") #'consult-focus-lines)
    ;; Other bindings
    (define-key acdw/map (kbd "M-y") #'consult-yank-pop)
    (define-key acdw/map (kbd "<f1> a") #'consult-apropos)
    (define-key acdw/map (kbd "C-h a") #'consult-apropos))
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (autoload 'consult-register-preview "consult") ; make the compiler happy
  (setq-default register-preview-delay 0
                register-preview-function #'consult-register-preview)
#+end_src

*** Marginalia                                                      :package:

Finally, =marginalia= provides extra information about completion
candidates.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'marginalia)
  (require 'marginalia)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (marginalia-mode +1)
#+end_src

I like the rich annotations provided by =marginalia=.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default marginalia-annotators
                '(marginalia-annotators-heavy
                  marginalia-annotators-light
                  nil))
#+end_src

**** Integration with Selectrum

#+begin_src emacs-lisp :noweb-ref functions
  (advice-add #'marginalia-cycle :after
              (lambda ()
                (when (bound-and-true-p selectrum-mode)
                  (selectrum-exhibit))))
#+end_src

** Imenu

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default imenu-auto-rescan t)
#+end_src

** Completion

*** Hippie Expand

Before I install any completion framework, I want a good default for
completing.  =hippie-expand= fills that niche.

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/map (kbd "M-/") #'hippie-expand)
#+end_src

** Bindings

*** Acdw Mode

I've decided to set up a custom minor mode for my keybindings, as
suggested in [[https://github.com/larstvei/dot-emacs#key-bindings][Lars Tvei]]'s config, so that I can override all other
modes with my own keybindings.  Plus I can easily turn it off and back
on as I please.

#+begin_src emacs-lisp :noweb-ref acdw-mode
  (defvar acdw/map (make-sparse-keymap)
    "A keymap for my custom bindings.")

  (define-minor-mode acdw/mode
      "A mode for `acdw/map'."
    :init-value t
    :lighter " ⱷ"
    :keymap acdw/map)

  (define-globalized-minor-mode acdw/global-mode acdw/mode acdw/mode)
#+end_src

**** Turn off acdw/mode in the minibuffer

#+begin_src emacs-lisp :noweb-ref acdw-mode
  (defun acdw/mode--disable ()
    "Turn off acdw/mode."
    (acdw/mode -1))

  (add-hook 'minibuffer-setup-hook #'acdw/mode--disable)
#+end_src

**** Custom leader

Since =C-z= is generally pretty useless in Emacs (minimize the window?
really?), I rebind it to be a sort of personal leader key.  I
generally use it as a leader for entering applications.

#+begin_src emacs-lisp :noweb-ref acdw-mode
  (defvar acdw/leader
    (let ((map (make-sparse-keymap))
          (c-z (global-key-binding "\C-z")))
      ;(global-unset-key "\C-z")
      (define-key acdw/map "\C-z" map)
      (define-key map "\C-z" c-z)
      map))

  ;; Just in case I want to run hooks after defining the leader map
  (run-hooks 'acdw/leader-defined-hook)
#+end_src

*** Show keybindings with =which-key=                                 :package:

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'which-key)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (which-key-mode +1)
  (blackout 'which-key-mode)
#+end_src

** Scrolling

According to [[https://github.com/mpereira/.emacs.d#make-cursor-movement-an-order-of-magnitude-faster][Murilo Pereira]], these settings will make Emacs scrolling
"an order of magnitude faster."

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default auto-window-vscroll nil
                fast-but-imprecise-scrolling t)
#+end_src

** Enable commands

I think the /disabled command/ feature of Emacs is stupid, especially
for a program that values freedom so much.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default disabled-command-function nil)
#+end_src

** CRUX                                                        :package:crux:

A collection of generally-useful functions that I don't want to bother
including here myself.  This is kind of an experiment, to be honest.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package '(crux
                          :host github
                          :repo "bbatsov/crux"))
  (require 'crux)
#+end_src

A note: I /don't/ do the same with [[https://github.com/alphapapa/unpackaged.el][unpackaged]] (see below, specifically
the *Org* sections) because it pulls in =hydra= and =use-package=, et al.

* Persistence

** Minibuffer history

The =savehist= package saves minibuffer history between sessions, as
well as the option for some other variables.  Since storage is cheap,
I keep all of it.

#+begin_src emacs-lisp :noweb-ref requires
  (require 'savehist)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (setq-default savehist-additional-variables
                '(kill-ring
                  search-ring
                  regexp-search-ring)
                history-length t ; Don't truncate
                history-delete-duplicates t
                savehist-autosave-interval 60)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (savehist-mode +1)
#+end_src

** File places

The =saveplace= package saves where I've been in my visited files.

#+begin_src emacs-lisp :noweb-ref requires
  (require 'saveplace)
#+end_src

Since storage is cheap, but I'm impatient -- especially on Windows --
I'm not going to check whether the files =save-place= saves the places
of are readable or not when I'm not at home.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default save-place-forget-unreadable-files
                (memq system-type '(gnu gnu/linux gnu/kfreebsd)))
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (save-place-mode +1)
#+end_src

** Recent files

I also like to keep track of recently-opened files.  =recentf= helps
with that.

#+begin_src emacs-lisp :noweb-ref requires
  (require 'recentf)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default recentf-max-menu-items 100
                recentf-max-saved-items nil
                recentf-auto-cleanup 'never)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (recentf-mode +1)
#+end_src

I also want to ignore the =no-littering-var-directory= and
=no-littering-etc-directory=, since those aren't useful.

#+begin_src emacs-lisp :noweb-ref no-littering
  (add-to-list 'recentf-exclude no-littering-var-directory)
  (add-to-list 'recentf-exclude no-littering-etc-directory)
#+end_src

*** Save the recentf list periodically

#+begin_src emacs-lisp :noweb-ref functions
  (defun maybe-save-recentf ()
    "Save `recentf-file' every five minutes, but only when out of focus."
    (defvar recentf--last-save (time-convert nil 'integer)
      "When we last saved the `recentf-save-list'.")

    (when (> (time-convert (time-since recentf--last-save) 'integer)
             (* 60 5))
      (setq-default recentf--last-save (time-convert nil 'integer))
      (when-unfocused #'recentf-save-list)))
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (add-function :after after-focus-change-function
                #'maybe-save-recentf)
#+end_src

* Responsiveness

Emacs has a slew of well-documented problems with snappiness.
Luckily, there are a number of solutions.

** Only do things when unfocused

Sometimes, we can fake responsiveness by only performing commands when
the user is looking at something else.

#+begin_src emacs-lisp :noweb-ref functions
  (defun when-unfocused (func &rest args)
    "Run FUNC, with ARGS, iff all frames are out of focus."
    (when (seq-every-p #'null (mapcar #'frame-focus-state (frame-list)))
      (apply func args)))
#+end_src

** Garbage collection

*** Garbage Collection Magic Hack                                   :package:

Look, I'm not going to look too deeply into this.  It's /magic/ afer
all.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'gcmh)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (gcmh-mode +1)
  (blackout 'gcmh-mode)
#+end_src

*** Garbage Collect when out of focus

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--gc-when-unfocused ()
    (when-unfocused #'garbage-collect))

  (add-function :after after-focus-change-function
                #'hook--gc-when-unfocused)
#+end_src

* Files

** Encoding

*** UTF-8

It's 2020.  Let's encode files like it is.

#+begin_src emacs-lisp :noweb-ref settings
  (prefer-coding-system 'utf-8)
  (set-default-coding-systems 'utf-8)
  (set-terminal-coding-system 'utf-8)
  (set-keyboard-coding-system 'utf-8)
  (set-language-environment "UTF-8")

  (setq-default locale-coding-system 'utf-8
                buffer-file-coding-system 'utf-8
                x-select-request-type '(UTF8_STRING COMPOUND_TEXT TEXT STRING))
#+end_src

*** UNIX-style line endings

This function is from the [[https://www.emacswiki.org/emacs/EndOfLineTips][Emacs Wiki]].

#+begin_src emacs-lisp :noweb-ref functions
  (defun ewiki/no-junk-please-were-unixish ()
    "Convert line endings to UNIX, dammit."
    (let ((coding-str (symbol-name buffer-file-coding-system)))
      (when (string-match "-\\(?:dos\\|mac\\)$" coding-str)
        (set-buffer-file-coding-system 'unix))))
#+end_src

I add it to both =file-find-hook= /and/ =before-save-hook= because I'm
/that/ over it.  I don't want to ever work with anything other than
UNIX line endings ever again. I just don't care. Even Microsoft
Notepad can handle UNIX line endings, so I don't want to hear it.

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'find-file-hook #'ewiki/no-junk-please-were-unixish)
  (add-hook 'before-save-hook #'ewiki/no-junk-please-were-unixish)
#+end_src

** Keep =~/.emacs.d= clean                                            :package:

#+begin_src emacs-lisp :noweb-ref packages :noweb yes
  (straight-use-package 'no-littering)
  (require 'no-littering)
  (with-eval-after-load 'no-littering
    <<no-littering>>
    ) ; end of no-littering
#+end_src

** Backups

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default backup-by-copying t
                ;; Don't delete old versions
                delete-old-versions -1
                ;; Make numeric backups unconditionally
                version-control t
                ;; Also backup files covered by version control
                vc-make-backup-files t)
#+end_src

#+begin_src emacs-lisp :noweb-ref no-littering
  (let ((dir (no-littering-expand-var-file-name "backup")))
    (make-directory dir :parents)
    (setq-default backup-directory-alist
                  `((".*" . ,dir))))
#+end_src

** Autosaves                                                        :package:

I don't use the =auto-save= system, preferring instead to use
Bozhidar Batsov's [[https://github.com/bbatsov/super-save][super-save]] package.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default auto-save-default nil)

  (setq-default super-save-remote-files nil
                super-save-exclude '(".gpg")
                super-save-auto-save-when-idle t)
#+end_src

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'super-save)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (super-save-mode +1)
  (blackout 'super-save-mode)
#+end_src

** Lockfiles

I don't think these are really necessary as of now.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default create-lockfiles nil)
#+end_src

** Auto-revert files

I like to keep the buffers Emacs has in-memory in sync with the actual
contents of the files the represent on-disk.  Thus, we have
=auto-revert-mode=.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default auto-revert-verbose nil)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (global-auto-revert-mode +1)
#+end_src

* Editing

** Lines

*** Fill-column

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default fill-column 80)
#+end_src

By default, Emacs uses =C-x f= to set the =fill-column=.  I think it's
pretty dumb that such an easy-to-reach binding (for Emacs) is set to a function
that I /literally/ never use.  So I'm going to bind it to =find-file= ... since
that's the only time I accidentally call it, anyway.

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/map (kbd "C-x f") #'find-file)
#+end_src

*** Auto-fill vs. Visual-line

I've mostly been using visual-line mode, and it's been pretty good.
There are some times, however, when lines are just ... really long,
and they wrap weird or whatever.  Not to mention, in Org mode,
=visual-line-mode= screws up the bindings for line movement.  So
here's what I'm going to do.

1. Enable =visual-line-mode= with =text-mode=, but /not/ with
   =org-mode=.

   #+begin_src emacs-lisp :noweb-ref hooks
     (defun hook--visual-line-mode ()
       (unless (eq major-mode 'org-mode)
         (visual-line-mode +1)))

     (add-hook 'text-mode-hook #'hook--visual-line-mode)
   #+end_src

2. Enable =auto-fill-mode= with text modes.

   #+begin_src emacs-lisp :noweb-ref hooks
     (add-hook 'text-mode-hook #'auto-fill-mode)
   #+end_src

3. /Just/ in case ... let's "fix" =visual-line-mode= if we're in =org-mode=.

   #+begin_src emacs-lisp :noweb-ref hooks
     (defun hook--visual-line-fix-org-keys ()
       (when (derived-mode-p 'org-mode)
         (local-set-key (kbd "C-a") #'org-beginning-of-line)
         (local-set-key (kbd "C-e") #'org-end-of-line)
         (local-set-key (kbd "C-k") #'org-kill-line)))

     (add-hook 'visual-line-mode-hook #'hook--visual-line-fix-org-keys)
  
   #+end_src

I think that'll work -- I only care about line aesthetics with text.
Programming modes should be /allowed/ to have long lines, regardless
of how /terrible/ it is to have them.

*** Stay snappy with long-lined files

#+begin_src emacs-lisp :noweb-ref modes
  (when (fboundp 'global-so-long-mode)
    (global-so-long-mode +1))
#+end_src

** Whitespace

*** Whitespace style

The =whitespace-style= defines what kinds of whitespace to clean up on
=whitespace-cleanup=, as well as what to highlight (if that option is
enabled).

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default whitespace-style '(empty ; remove blank lines at buffer edges
                                   indentation ; clean up indentation
                                   ;; fix mixed spaces and tabs
                                   space-before-tab
                                   space-after-tab))
#+end_src

*** Clean up whitespace on save

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'before-save-hook #'whitespace-cleanup)
#+end_src

*** Don't use TABs

I was team TAB for a while, but I find them easier to avoid in Emacs.
It manages my whitespace for me, anyway.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default indent-tabs-mode nil)
#+end_src

** Killing & Yanking

*** Replace the selection when typing

#+begin_src emacs-lisp :noweb-ref modes
  (delete-selection-mode +1)
#+end_src

*** Work better with the system clipboard

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default
   ;; Save existing clipboard text to the kill ring before replacing it.
   save-interprogram-paste-before-kill t
   ;; Update the X selection when rotating the kill ring.
   yank-pop-change-selection t
   ;; Enable clipboards
   x-select-enable-clipboard t
   x-select-enable-primary t
   ;; Copy a region when it's selected with the mouse
   mouse-drag-copy-region t)
#+end_src

*** Don't append the same thing twice to the kill ring

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default kill-do-not-save-duplicates t)
#+end_src

*** Kill the line if there is no region                                :crux:

#+begin_src emacs-lisp :noweb-ref hooks
  (crux-with-region-or-line kill-ring-save)
  (crux-with-region-or-line kill-region)
#+end_src

** Overwrite mode

*** Change the cursor

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--overwrite-mode-change-cursor ()
    (setq cursor-type (if overwrite-mode t 'bar)))

  (add-hook 'overwrite-mode-hook #'hook--overwrite-mode-change-cursor)
#+end_src

** The Mark

*** Repeat popping the mark without repeating the prefix argument

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default set-mark-repeat-command-pop t)
#+end_src

** Undo                                                               :package:

*** Undo Fu

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'undo-fu)
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/map (kbd "C-/") #'undo-fu-only-undo)
  (define-key acdw/map (kbd "C-?") #'undo-fu-only-redo)
#+end_src

*** Undo Fu session

I'm not putting this in [[*Persistence]] because it'd be confusing away
from =undo-fu=.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'undo-fu-session)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default undo-fu-session-incompatible-files
                '("/COMMIT_EDITMSG\\'"
                  "/git-rebase-todo\\'"))
#+end_src

#+begin_src emacs-lisp :noweb-ref no-littering
  (let ((dir (no-littering-expand-var-file-name "undos")))
    (make-directory dir :parents)
    (setq-default undo-fu-session-directory dir))
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (global-undo-fu-session-mode +1)
#+end_src

** Search/Replace                                                     :package:

The /biggest/ thing I miss about my Neovim days is its ease of
search/replace.  It didn't matter where the point was in the buffer;
it could wrap around.  It had a little highlight to show you all the
matching strings, /and/ it could show you what the replacement would
look like.  =anzu= does /most/ of this, except the wrapping around part --
=ctrlf= does the wrapping around okay, but I haven't really tried to get
the two packages to play nice together.  Until then, I'll just use
=anzu= and =isearch=, which is honestly a pretty good search package.

*** Anzu setup

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'anzu)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default anzu-mode-lighter "" ; hide anzu-mode in the modeline
                anzu-replace-to-string-separator " → ")

  ;; Set up anzu in the modeline
  (setq-default anzu-cons-mode-line-p nil)
  (setcar (cdr (assq 'isearch-mode minor-mode-alist))
          '(:eval (concat " " (anzu--update-mode-line))))
#+end_src

*** Regex

I search with regex by default.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default
   ;; Search Regex by default
   search-default-mode t)
#+end_src

I've switched =query-replace= and =query-replace-regexp= with their anzu
versions, because of the regex thing.

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/map [remap query-replace] #'anzu-query-replace-regexp)
  (define-key acdw/map [remap query-replace-regexp] #'anzu-query-replace)

  (define-key isearch-mode-map [remap isearch-query-replace]
    #'anzu-isearch-query-replace)
  (define-key isearch-mode-map [remap isearch-query-replace-regexp]
    #'anzu-isearch-query-replace-regexp)
#+end_src

** Commenting                                                            :crux:

I don't think the default =M-;= (=M-x comment-dwim=) binding makes sense.
I want it to comment out the region or line, or uncomment it if it's
already commented.  That's it.

#+begin_src emacs-lisp :noweb-ref hooks
  (crux-with-region-or-line comment-or-uncomment-region)
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/map (kbd "M-;") #'comment-or-uncomment-region)
#+end_src

* Writing

** COMMENT Word count                                               :package:

I'm just going to comment this out for right now because I honestly
don't know if it's that useful.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'wc-mode)
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--wc-mode-no-keybinds ()
    (wc-mode +1)
    (define-key wc-mode-map (kbd "C-c C-w w") nil)
    (define-key wc-mode-map (kbd "C-c C-w l") nil)
    (define-key wc-mode-map (kbd "C-c C-w a") nil)
    (define-key wc-mode-map (kbd "C-c C-w c") nil))

  (add-hook 'text-mode-hook #'hook--wc-mode-no-keybinds)
#+end_src

* Programming

** Comments

*** Auto fill comments in programming modes

Okay, so I lied in the [[*Auto-fill vs. Visual-line][Auto-fill vs. Visual-line]] section.  I /do/ want
to auto-fill in programming modes, but /only/ the comments.

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--comment-auto-fill ()
    (setq-local comment-auto-fill-only-comments t)
    (auto-fill-mode +1))

  (add-hook 'prog-mode-hook #'hook--comment-auto-fill)
#+end_src

** Parentheses

*** Show parentheses

#+begin_src emacs-lisp :noweb-ref modes
  (show-paren-mode +1)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default show-paren-delay 0
                ;; Show the matching paren if visible, else the whole expression
                show-paren-style 'mixed)
#+end_src

*** Smart parens                                                    :package:

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'smartparens)
  (require 'smartparens-config)
#+end_src

**** Show parens

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default sp-show-pair-delay 0
                sp-show-pair-from-inside t)
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'prog-mode-hook #'show-smartparens-mode)
#+end_src

**** Hide the =smartparens= lighter

#+begin_src emacs-lisp :noweb-ref modes
  (blackout 'smartparens-mode)
#+end_src

**** Be strict in =prog-mode=

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'prog-mode-hook #'smartparens-strict-mode)
#+end_src

**** Use =paredit= bindings

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default sp-base-keybindings 'paredit)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (with-eval-after-load 'smart-parens
    (sp-use-paredit-bindings))
#+end_src

** Formatting

*** Aggressive indent                                               :package:

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'aggressive-indent)
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (global-aggressive-indent-mode +1)
  (blackout 'aggressive-indent-mode)
#+end_src

Since aggressive indenting takes care of tabs, I can use =<TAB>= to complete
things!

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default tab-always-indent 'complete)
#+end_src

** Typesetting

*** Prettify-mode

I like my pretty =lambda='s -- and maybe one day, I'll add more symbols,
but only in prog-mode.  I want to see what I'm actually typing in
text.

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'prog-mode-hook #'prettify-symbols-mode)
#+end_src

Of course, I want to be able to /see/ the actual text in the buffer if
I'm /in/ the symbols.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default prettify-symbols-unprettify-at-point 'right-edge)
#+end_src

** Executable scripts

This poorly-named function will make a file executable if it looks
like a script (looking at the function definition, it looks like it
checks for a shebang).

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'after-save-hook
            #'executable-make-buffer-file-executable-if-script-p)
#+end_src

** Compilation

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default compilation-ask-about-save nil ; just save
                compilation-always-kill t ; kill the old processes
                compilation-scroll-output 'first-error)
#+end_src

** Language-specific

*** Emacs Lisp

**** Don't limit the length of evaluated expressions

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default eval-expression-print-length nil
                eval-expression-print-level nil)
#+end_src

**** Indent Elisp like Common Lisp

#+begin_src emacs-lisp :noweb-ref requires
  (require 'cl-lib)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default lisp-indent-function #'common-lisp-indent-function)
  (put 'cl-flet 'common-lisp-indent-function
       (get 'flet 'common-lisp-indent-function))
  (put 'cl-labels 'common-lisp-indent-function
       (get 'labels 'common-lisp-indent-function))
  (put 'if 'common-lisp-indent-function 2)
  (put 'dotimes-protect 'common-lisp-indent-function
       (get 'when 'common-lisp-indent-function))
#+end_src

* Applications

Emacs is well-known for its ability to subsume one's entire computing
life.  There are a few /killer apps/ that make Emacs really shine.
Here, I configure them and a few others.

My rubric for what makes a package an application, versus just a
package, is mostly based on the way I feel about it.  Don't expect to
agree with all of my choices.

** Web browsing

*** Browse-url

I like using Firefox.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default browse-url-browser-function 'browse-url-firefox
                browse-url-new-window-flag t
                browse-url-firefox-new-window-is-tab t)
#+end_src

At work, I need to tell Emacs where Firefox is.

#+begin_src emacs-lisp :noweb-ref windows-specific
  (add-to-list 'exec-path "C:/Program Files/Mozilla Firefox")
#+end_src

** Dired

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--dired-mode ()
    (hl-line-mode +1)
    (dired-hide-details-mode +1))

  (add-hook 'dired-mode-hook #'hook--dired-mode)
#+end_src

A note on =dired-listing-switches=: when I'm able to figure out how to
move up a directory with a keybinding, I'll change =-a= to =-A=.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default dired-recursive-copies 'always
                dired-recursive-deletes 'always
                delete-by-moving-to-trash t
                dired-listing-switches "-AFgho --group-directories-first"
                dired-dwim-target t)
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/map (kbd "C-x C-j") #'dired-jump)
#+end_src

*** Expand subtrees                                                 :package:

Instead of opening each folder in its own buffer, =dired-subtree=
enables me to open them in the same buffer, fancily indented.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'dired-subtree)
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (with-eval-after-load 'dired
    (define-key dired-mode-map "i" #'dired-subtree-toggle))
#+end_src

*** Collapse singleton directories                                  :package:

If a directory only has one item in it, =dired-collapse= shows what
that one item is.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'dired-collapse)
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'dired-mode-hook #'dired-collapse-mode)
#+end_src

** Git                                                                :package:

*** Magit

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'magit)
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/leader "g" #'magit-status)
#+end_src

**** Use =~/.authinfo= for passwords

The =auth-info= line should look like this:

#+begin_example
machine git.example.com user acdw password hahayeahrightyamoroniwouldn'tgiveyouthat
#+end_example

#+begin_src emacs-lisp :noweb-ref hooks
  (autoload 'magit-process-password-auth-source "magit")
  (add-hook 'magit-process-find-password-functions
            #'magit-process-password-auth-source)
#+end_src

**** Windows setup

Following the [[https://github.com/magit/magit/wiki/Pushing-with-Magit-from-Windows][wiki page located here]].  Also make sure to run the
following in =cmd.exe= to set =$HOME= correctly:

#+begin_src cmd
  setx HOME C:\Users\aduckworth\Downloads\acdw
#+end_src

/and/ run /this/ command to setup a git credential helper:

#+begin_src sh
  git config --global credential.helper store
#+end_src

Okay, okay, using the =store= credential.helper is /super/ insecure.  But
here's the thing -- the Gits I Git at work (a) aren't my /real/ git, and
(b) they're just tokens!  So any time I think somebody got access, I
just revoke the tokens and bingo bongo, good to go.  If that's not
true, please feel free to hack this repo and change this paragraph.

#+begin_src emacs-lisp :noweb-ref windows-specific
  (setenv "GIT_ASKPASS" "git-gui--askpass")
#+end_src

**** Forge                                                          :package:

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'forge)
  (with-eval-after-load 'magit
    (require 'forge))
#+end_src

*** Git file modes                                                  :package:

#+begin_src emacs-lisp :noweb-ref packages
  (dolist (feat '(gitattributes-mode
                  gitconfig-mode
                  gitignore-mode))
    (straight-use-package feat)
    (require feat))
#+end_src

** Crosswords!                                                        :package:

I love crosswords.  I love Emacs.  There ya go.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package '(crossword
                          :host github
                          :repo "Boruch-Baum/emacs-crossword"))
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default crossword-empty-position-char "#")
#+end_src

#+begin_src emacs-lisp :noweb-ref no-littering
  (setq-default crossword-save-path
                (no-littering-expand-var-file-name "crosswords/"))
  (unless (file-exists-p crossword-save-path)
    (make-directory crossword-save-path :parents))
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--setup-crossword ()
    (setq cursor-type 'hbar))

  (add-hook 'crossword-mode-hook #'hook--setup-crossword)
#+end_src

The problem with this package is that the default faces are pretty
bad, to be honest.  Let's change em.

#+begin_src emacs-lisp :noweb-ref settings
  (doremi-face-set 'crossword-current-face
                   '((((class color)
                       (background light))
                      (:inherit 'normal :foreground "black"
                       :background "lightgreen"))
                     (((class color)
                       (background dark))
                      (:inherit 'normal :foreground "white"
                       :background "darkgreen"))
                     (t
                      (:inherit 'normal :foreground "black"
                       :background "darkgreen"))))

  (doremi-face-set 'crossword-other-dir-face
                   '((((class color)
                       (background light))
                      (:inherit 'normal :foreground "black"
                       :background "darkgrey"))
                     (((class color)
                       (background dark))
                      (:inherit 'normal :foreground "black"
                       :background "darkgrey"))
                     (t
                      (:inherit 'normal :foreground "black"
                       :background "darkgrey"))))
#+end_src

** TODO Gnus

See [[https://github.com/redguardtoo/mastering-emacs-in-one-year-guide/blob/master/gnus-guide-en.org][this guide]] and try it out.

** RSS Feeds                                                          :package:

*** Elfeed and goodies

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'elfeed)
  (straight-use-package 'elfeed-goodies)
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (with-eval-after-load 'elfeed
    (require 'elfeed-goodies)
    (elfeed-goodies/setup))
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default elfeed-goodies/entry-pane-position 'bottom
                elfeed-goodies/powerline-default-separator nil
                elfeed-goodies/tag-column-width 16)
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--elfeed-show ()
    (visual-line-mode +1))

  (add-hook 'elfeed-show-mode-hook #'hook--elfeed-show)
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/leader "f" #'elfeed)
#+end_src

*** Elfeed-protocol

I'm not /the most/ happy with this -- it seems like a lot for not that
much -- but until I figure out a proper syncing solution, it'll do.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'elfeed-protocol)
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default elfeed-protocol-ttrss-maxsize 200
                elfeed-feeds
                '(("ttrss+https://acdw@rss.tildeverse.org"
                   :use-authinfo t)))
#+end_src

#+begin_src emacs-lisp :noweb-ref modes
  (with-eval-after-load 'elfeed
    (elfeed-protocol-enable))
#+end_src

For whatever reason, =G= (=elfeed-search-fetch=) doesn't fetch anything
new from TTRSS.  So I rebind it to ... =elfeed-protocol-ttrss-reinit=
(=elfeed-protocol-ttrss-update= doesn't pull everything for some reason
... this kind of thing is why I'm looking at other elfeed-sync
options).

#+begin_src emacs-lisp :noweb-ref bindings
  (with-eval-after-load 'elfeed-protocol
    (defun acdw-elfeed-protocol-ttrss-update-then-reinit ()
      "Update, then reinit, the first entry in `elfeed-feeds'."
      (interactive)
      (let ((url (caar elfeed-feeds))
            (msg-update "Elfeed Protocol: Updating...")
            (msg-reinit "Elfeed Protocol: Re-initializing..."))
        (message "%s" msg-update)
        (elfeed-protocol-ttrss-update url)
        (message "%s Done." msg-update)

        (message "%s" msg-reinit)
        (elfeed-protocol-ttrss-reinit url)
        (message "%s Done." msg-reinit)))

    (define-key elfeed-search-mode-map "G"
      #'acdw-elfeed-protocol-ttrss-update-then-reinit))
#+end_src

** 0x0 (null pointer)                                                 :package:

An ease-of-life package that lets me upload my shitty code to share it with
others.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package '(0x0
                          :repo "https://git.sr.ht/~zge/nullpointer-emacs"))
#+end_src

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default 0x0-default-service 'ttm)
#+end_src

* Org mode                                                            :package:

** Install it with =straight.el=

I want to use the newest version of Org that I can.

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'org)

  (with-eval-after-load 'org
    (require 'org-tempo)
    (require 'ox-md))
#+end_src

** Basic settings

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default
   ;; Where to look for Org files
   org-directory "~/org" ; this is the default
   ;; Fontify stuff
   org-hide-emphasis-markers t
   org-fontify-whole-heading-line t
   org-fontify-done-headline t
   org-fontify-quote-and-verse-blocks t
   org-src-fontify-natively t
   org-ellipsis "…"
   org-pretty-entities t
   org-tags-column (- 0 fill-column -1)
   ;; Source blocks
   org-src-tab-acts-natively t
   org-src-window-setup 'current-window ; the least stupid option
   org-confirm-babel-evaluate nil
   ;; Behavior
   org-adapt-indentation nil ; don't indent things
   org-catch-invisible-edits 'smart ; let's try this
   org-special-ctrl-a/e t
   org-special-ctrl-k t
   org-imenu-depth 8
   ;; Exporting
   org-export-headline-levels 8
   org-export-with-smart-quotes t
   org-export-with-sub-superscripts t)
#+end_src

** Aesthetics

*** Prettify some other symbols

#+begin_src emacs-lisp :noweb-ref functions
  (defun acdw/org-mode-prettify ()
    "Prettify `org-mode'."
    (dolist (cell '(("[ ]" . ?☐) ("[X]" . ?☑) ("[-]" . ?◐)
                    ("#+BEGIN_SRC" . ?✎) ("#+begin_src" . ?✎)
                    ("#+BEGIN_QUOTE" . ?❝) ("#+begin_quote" . ?❝)
                    ("#+END_QUOTE" . ?❞) ("#+end_quote" . ?❞)
                    ("#+END_SRC" . ?■) ("#+end_src" . ?■)))
      (add-to-list 'prettify-symbols-alist cell :append))
    (prettify-symbols-mode +1))
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'org-mode-hook #'acdw/org-mode-prettify)
#+end_src

*** Prettify lists and checkboxes using font-lock

from [[https://github.com/KaratasFurkan/.emacs.d#org-1][Furkan Karataş]].

#+begin_src emacs-lisp :noweb-ref modes
  (with-eval-after-load 'org
    (font-lock-add-keywords 'org-mode
                            '(("^ *\\([-]\\) "
                               (0 (prog1 ()
                                    (compose-region (match-beginning 1) (match-end 1) "•"))))))
    (font-lock-add-keywords 'org-mode
                            '(("^ *\\([+]\\) "
                               (0 (prog1 ()
                                    (compose-region (match-beginning 1) (match-end 1) "◦"))))))
  
    (defface org-checkbox-done-text
        '((t (:inherit 'font-lock-comment-face :slant normal)))
      "Face for the text part of a checked org-mode checkbox."
      :group 'org)

    (font-lock-add-keywords
     'org-mode
     `(("^[ \t]*\\(?:[-+*]\\|[0-9]+[).]\\)[ \t]+\\(\\(?:\\[@\\(?:start:\\)?[0-9]+\\][ \t]*\\)?\\[\\(?:X\\|\\([0-9]+\\)/\\2\\)\\][^\n]*\n\\)"
        1 'org-checkbox-done-text prepend))
     'append))
#+end_src

** Org templates

#+begin_src emacs-lisp :noweb-ref settings
  (with-eval-after-load 'org-tempo
    (dolist (cell '(("el" . "src emacs-lisp")
                    ("cr" . "src emacs-lisp :noweb-ref requires")
                    ("cf" . "src emacs-lisp :noweb-ref functions")
                    ("cs" . "src emacs-lisp :noweb-ref settings")
                    ("cm" . "src emacs-lisp :noweb-ref modes")
                    ("cl" . "src emacs-lisp :noweb-ref linux-specific")
                    ("cw" . "src emacs-lisp :noweb-ref windows-specific")
                    ("cp" . "src emacs-lisp :noweb-ref packages")
                    ("ch" . "src emacs-lisp :noweb-ref hooks")
                    ("cb" . "src emacs-lisp :noweb-ref bindings")
                    ("cnl" . "src emacs-lisp :noweb-ref no-littering")))
      (add-to-list 'org-structure-template-alist cell)))
#+end_src

** Org Return: DWIM

#+begin_src emacs-lisp :noweb-ref functions
  (defun unpackaged/org-element-descendant-of (type element)
    "Return non-nil if ELEMENT is a descendant of TYPE.
  TYPE should be an element type, like `item' or `paragraph'.
  ELEMENT should be a list like that returned by `org-element-context'."
    ;; MAYBE: Use `org-element-lineage'.
    (when-let* ((parent (org-element-property :parent element)))
      (or (eq type (car parent))
          (unpackaged/org-element-descendant-of type parent))))

  (defun unpackaged/org-return-dwim (&optional default)
    "A helpful replacement for `org-return'.  With prefix, call `org-return'.

  On headings, move point to position after entry content.  In
  lists, insert a new item or end the list, with checkbox if
  appropriate.  In tables, insert a new row or end the table."
    ;; Inspired by John Kitchin:
    ;; http://kitchingroup.cheme.cmu.edu/blog/2017/04/09/A-better-return-in-org-mode/
    (interactive "P")
    (if default
        (org-return)
      (cond
        ;; Act depending on context around point.

        ;; NOTE: I prefer RET to not follow links, but by uncommenting
        ;; this block, links will be followed.
        ;; FURTHER NOTE: Ideally, I would follow links unless point
        ;; /appeared/ to be at the end of the line (even if it's still
        ;; inside the link) -- when it would do `org-return'.  That
        ;; would take some /doing/, however.

        ;; ((eq 'link (car (org-element-context)))
        ;;  ;; Link: Open it.
        ;;  (org-open-at-point-global))

        ((org-at-heading-p)
         ;; Heading: Move to position after entry content.
         ;; NOTE: This is probably the most interesting feature of this function.
         (let ((heading-start (org-entry-beginning-position)))
           (goto-char (org-entry-end-position))
           (cond ((and (org-at-heading-p)
                       (= heading-start (org-entry-beginning-position)))
                  ;; Entry ends on its heading; add newline after
                  (end-of-line)
                  (insert "\n\n"))
                 (t
                  ;; Entry ends after its heading; back up
                  (forward-line -1)
                  (end-of-line)
                  (when (org-at-heading-p)
                    ;; At the same heading
                    (forward-line)
                    (insert "\n")
                    (forward-line -1))
                  ;; FIXME: looking-back is supposed to be called with
                  ;; more arguments.
                  (while (not (looking-back (rx
                                             (repeat 3
                                                     (seq (optional blank)
                                                          "\n")))
                                            nil))
                    (insert "\n"))
                  (forward-line -1)))))

        ((org-at-item-checkbox-p)
         ;; Checkbox: Insert new item with checkbox.
         (org-insert-todo-heading nil))

        ((org-in-item-p)
         ;; Plain list.  Yes, this gets a little complicated...
         (let ((context (org-element-context)))
           (if (or (eq 'plain-list (car context))  ; First item in list
                   (and (eq 'item (car context))
                        (not (eq (org-element-property :contents-begin context)
                                 (org-element-property :contents-end context))))
                   ;; Element in list item, e.g. a link
                   (unpackaged/org-element-descendant-of 'item context))
               ;; Non-empty item: Add new item.
               (org-insert-item)
             ;; Empty item: Close the list.
             ;; TODO: Do this with org functions rather than operating
             ;; on the text. Can't seem to find the right function.
             (delete-region (line-beginning-position) (line-end-position))
             (insert "\n"))))

        ((when (fboundp 'org-inlinetask-in-task-p)
           (org-inlinetask-in-task-p))
         ;; Inline task: Don't insert a new heading.
         (org-return))

        ((org-at-table-p)
         (cond ((save-excursion
                  (beginning-of-line)
                  ;; See `org-table-next-field'.
                  (cl-loop with end = (line-end-position)
                     for cell = (org-element-table-cell-parser)
                     always (equal (org-element-property :contents-begin cell)
                                   (org-element-property :contents-end cell))
                     while (re-search-forward "|" end t)))
                ;; Empty row: end the table.
                (delete-region (line-beginning-position) (line-end-position))
                (org-return))
               (t
                ;; Non-empty row: call `org-return'.
                (org-return))))
        (t
         ;; All other cases: call `org-return'.
         (org-return)))))
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (with-eval-after-load 'org
    (define-key org-mode-map (kbd "RET") #'unpackaged/org-return-dwim))
#+end_src

** Insert blank lines around headers

#+begin_src emacs-lisp :noweb-ref functions
  (defun unpackaged/org-fix-blank-lines (&optional prefix)
    "Ensure that blank lines exist between headings and between headings and their contents.
  With prefix, operate on whole buffer. Ensures that blank lines
  exist after each headings's drawers."
    (interactive "P")
    (org-map-entries (lambda ()
                       (org-with-wide-buffer
                        ;; `org-map-entries' narrows the buffer, which prevents us
                        ;; from seeing newlines before the current heading, so we
                        ;; do this part widened.
                        (while (not (looking-back "\n\n" nil))
                          ;; Insert blank lines before heading.
                          (insert "\n")))
                       (let ((end (org-entry-end-position)))
                         ;; Insert blank lines before entry content
                         (forward-line)
                         (while (and (org-at-planning-p)
                                     (< (point) (point-max)))
                           ;; Skip planning lines
                           (forward-line))
                         (while (re-search-forward org-drawer-regexp end t)
                           ;; Skip drawers. You might think that `org-at-drawer-p'
                           ;; would suffice, but for some reason it doesn't work
                           ;; correctly when operating on hidden text.  This
                           ;; works, taken from `org-agenda-get-some-entry-text'.
                           (re-search-forward "^[ \t]*:END:.*\n?" end t)
                           (goto-char (match-end 0)))
                         (unless (or (= (point) (point-max))
                                     (org-at-heading-p)
                                     (looking-at-p "\n"))
                           (insert "\n"))))
                     t (if prefix
                           nil
                         'tree)))
#+end_src

I fix the headline spacing every time I save.

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--org-mode-fix-blank-lines ()
    (when (eq major-mode 'org-mode)
      (let ((current-prefix-arg 4)) ; Emulate C-u
        (call-interactively 'unpackaged/org-fix-blank-lines))))

  (add-hook 'before-save-hook #'hook--org-mode-fix-blank-lines)
#+end_src

** Org Agenda

I'm trying to organize my life.
Inspo:

- [[https://github.com/cadadr/configuration/blob/3e11ef25344188cc55b16f314c3c5358ace8a266/emacs.d/init.el#L4625][Göktuğ Kayaalp]]
- [[https://pages.sachachua.com/.emacs.d/Sacha.html#org1db6fe9][Sacha Chua]]

*** Basic Agenda Settings

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default org-agenda-files ; look for files in ~/org
                (list org-directory)
                ;; agenda
                org-agenda-span 5
                org-agenda-skip-scheduled-if-done t
                org-agenda-skip-deadline-if-done t
                org-deadline-warning-days 2
                ;; logging
                org-log-into-drawer "LOGBOOK"
                org-log-done t)
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/leader (kbd "C-a") #'org-agenda)
#+end_src

*** Agenda hooks

#+begin_src emacs-lisp :noweb-ref hooks
  (defun hook--org-agenda-mode ()
    (hl-line-mode +1))

  (add-hook 'org-agenda-mode-hook #'hook--org-agenda-mode)
#+end_src

*** Refile

#+begin_src emacs-lisp :noweb-ref settings
  (setq org-refile-targets '((org-agenda-files . (:maxlevel . 3))))
#+end_src

*** Calendar settings

I'm not sure where else to put these, to be honest.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default calendar-date-style 'iso) ; YYYY-mm-dd
#+end_src

*** Habits

Org can track habits!  Great stuff.  I need to add it to =org-modules=,
though.

#+begin_src emacs-lisp :noweb-ref settings
  (add-to-list 'org-modules 'org-habit)
#+end_src

Now I just add a =habit= property to a subtree, and BAM!

*** Org Todo Keywords

These need some more thinking -- e.g., the MEETING sequence should
maybe be a type, or maybe I need to include those in something else
altogether.  Hm.

#+begin_src emacs-lisp :noweb-ref settings
  (setq-default org-todo-keywords
                '((sequence
                   "TODO(t)" "STARTED(s)"
                   "WAITING(w@/!)" "SOMEDAY(.)"
                   "|" "DONE(x!)" "CANCELLED(c@/!)")
                  (sequence "RECUR(r)" "|" "DONE(x!)")
                  (sequence "MEETING(m)")))
#+end_src

** Org Capture

#+begin_src emacs-lisp :noweb-ref packages
  (require 'org-capture)
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (with-eval-after-load 'org-capture
    (define-key acdw/leader (kbd "C-c") #'org-capture))
#+end_src

I've still got a lot of thinking to do about what kinds of things I
want to capture, but I guess for now I can start with the basics:
TODO, and Diary.

#+begin_src emacs-lisp :noweb-ref settings
  (defvar acdw/org-inbox-file (expand-file-name "inbox.org" org-directory))
  (defvar acdw/org-diary-file (expand-file-name "diary.org" org-directory))
  (setq-default
   org-capture-templates
   `(;; Todo -- these go to the Inbox for further processing
     ("t" "Quick Task" entry
          (file ,acdw/org-inbox-file)
          "* TODO %^{Task}\n"
          :immediate-finish t)
     ("T" "Task" entry
          (file ,acdw/org-inbox-file)
          "* TODO %^{Task}\n")
     ("." "Today" entry
          (file ,acdw/org-inbox-file)
          "* TODO %^{Task}\nSCHEDULED: %t\n"
          :immediate-finish t)
     ;; Meetings
     ("m" "Meeting" entry
          (file ,acdw/org-inbox-file)
          "* MEETING %^{Meeting}\n%^T\n\n%?")
     ;; Diary -- for the special Diary file
     ("j" "Diary entry" entry
          (file+olp+datetree ,acdw/org-diary-file)
          "* %U\n\n%?"
          :empty-lines 1)
     ;; Books to read
     ("b" "Book to read" entry
          (file "books.org")
          "* TOREAD %^{Title}
  :PROPERTIES:
  :Author: %^{Author}
  :END:\n" :immediate-finish t)))

#+end_src

* Package management                                                  :package:
:PROPERTIES:
:header-args: :noweb-ref early-init-package
:END:

Emacs is the /extensible/ editor, and that means I want to use
third-party packages.  Of course, first I have to /manage/ those
packages.  I use the excellent =straight.el=.

** Update the PATH

PATH handling on Emacs is a little complicated.  There's the regular
environment variable =$PATH=, which we all know and love, and then
Emacs has its own special =exec-path= on /top/ of that.  From my
research, it looks like Emacs uses =exec-path= for itself, and =$PATH=
for any shells or other processes it spawns.  They don't /have/ to be
the same, but luckily for us, Emacs sets =exec-path= from =$PATH= on
initialization, so when I add stuff to =exec-path= to, say, run git, I
can just change =$PATH= right back to the expanded =exec-path= without
any data loss.  Here's what all that looks like.

#+begin_src emacs-lisp
  (let ((win-app-dir "~/Applications"))
    (dolist (path (list
                   ;; Windows
                   (expand-file-name "exe" win-app-dir)
                   (expand-file-name "Git/bin" win-app-dir)
                   (expand-file-name "Git/usr/bin" win-app-dir)
                   (expand-file-name "Git/mingw64/bin" win-app-dir)
                   (expand-file-name "Everything" win-app-dir)
                   (expand-file-name "Win-builds/bin" win-app-dir)
                   ;; Linux
                   (expand-file-name "bin" user-emacs-directory)
                   (expand-file-name "~/bin")
                   (expand-file-name "~/.local/bin")
                   (expand-file-name "~/Scripts")
                   ))
      (when (file-exists-p path)
        (add-to-list 'exec-path path :append))))

  ;; Set $PATH
  (setenv "PATH" (mapconcat #'identity exec-path path-separator))
#+end_src

*** References

- [[https://emacs.stackexchange.com/questions/550/exec-path-and-path][exec-path and $PATH (StackExchange)]]
- [[https://utoi.tistory.com/entry/Difference-Between-Emacss-%E2%80%9Cgetenv-PATH%E2%80%9D-and-%E2%80%9Cexec-path%E2%80%9D][Difference between Emacs's "(getenv PATH)" and "exec-path" (U&I)]]
- GUI Emacs sets the exec-path only from Windows environment variable
  but not from .emacs file [[https://emacs.stackexchange.com/questions/27326/gui-emacs-sets-the-exec-path-only-from-windows-environment-variable-but-not-from][(StackExchange)]]

** Disable =package.el=

#+begin_src emacs-lisp
  (setq package-enable-at-startup nil)
#+end_src

** Bootstrap

The following is straight (heh) from the straight repo, wrapped in a
function so I can call it in another wrapper.

#+begin_src emacs-lisp
  (defun acdw/bootstrap-straight ()
    "Bootstrap straight.el."
    (defvar bootstrap-version)
    (let ((bootstrap-file
           (expand-file-name
            "straight/repos/straight.el/bootstrap.el"
            user-emacs-directory))
          (bootstrap-version 5))
      (unless (file-exists-p bootstrap-file)
        (with-current-buffer
            (url-retrieve-synchronously
             (concat
              "https://raw.githubusercontent.com/"
              "raxod502/straight.el/develop/install.el")
             'silent 'inhibit-cookies)
          (goto-char (point-max))
          (eval-print-last-sexp)))
      (load bootstrap-file nil 'nomessage)))
#+end_src

To actually bootstrap straight, I'll first try running the above
directly.  If it errors (it tends to on Windows), I'll directly clone
the repo using git, /then/ run the bootstrap code.

#+begin_src emacs-lisp
  (when (executable-find "git")
    (unless (ignore-errors (acdw/bootstrap-straight))
      (let ((msg "Straight.el didn't bootstrap correctly.  Cloning directly"))
        (message "%s..." msg)
        (call-process "git" nil
                      (get-buffer-create "*bootstrap-straight-messages*") nil
                      "clone"
                      "https://github.com/raxod502/straight.el"
                      (expand-file-name "straight/repos/straight.el"
                                        user-emacs-directory))
        (message "%s...Done." msg)
        (acdw/bootstrap-straight))))
#+end_src

* System integration

I use both Linux (at home) and Windows (at work).  To make Emacs
easier to use in both systems, I've included various system-specific
settings and written some ancillary scripts.

** All systems

I'll put generic system-integrating code here.

*** Edit with Emacs                                                 :package:

Install the [[https://addons.mozilla.org/en-US/firefox/addon/edit-with-emacs1/][Firefox Addon]] alongside this package to edit web forms in
Emacs (or the [[https://chrome.google.com/webstore/detail/edit-with-emacs/ljobjlafonikaiipfkggjbhkghgicgoh][Chrome one]] if you... /hate/ freedom :P).

#+begin_src emacs-lisp :noweb-ref packages
  (straight-use-package 'edit-server)
#+end_src

#+begin_src emacs-lisp :noweb-ref hooks
  (add-hook 'after-init-hook #'edit-server-start)
#+end_src

*** =git-sync= ~/org

I don't know where else to put this, but it's just a little command to
run =git-sync= in =org-directory=.

#+begin_src emacs-lisp :noweb-ref functions
  (defun acdw/org-sync ()
    "Run git-sync in `org-directory'.

  Requires git-sync."
    (interactive)
    (async-shell-command
     (format "git -C %s sync" (expand-file-name org-directory))))

  (define-key acdw/leader (kbd "C-M-o") #'acdw/org-sync)
#+end_src

** Linux (home)
:PROPERTIES:
:header-args: :noweb-ref linux-specific
:END:

*** Settings

*** Scripts

**** em
:PROPERTIES:
:header-args: :tangle-mode (identity #o755) :mkdirp yes
:END:

Here's a wrapper script that'll start =emacs --daemon= if there isn't
one, and then launch =emacsclient= with the arguments.  Install it to
your =$PATH= somewhere.

#+begin_src sh :shebang "#!/bin/sh" :tangle (if (eq system-type 'gnu/linux) "~/bin/em" "")
  if ! emacsclient -nc "$@"; then
      emacs --daemon
      emacsclient -nc "$@"
  fi
#+end_src

**** emacsclient.desktop
:PROPERTIES:
:header-args: :mkdirp yes
:END:

I haven't really tested this yet, but it should allow me to open other
files and things in Emacs.  From [[https://www.taingram.org/blog/emacs-client.html][taingram]].

#+begin_src conf-desktop :tangle (if (eq system-type 'gnu/linux) "~/.local/share/applications/emacsclient.desktop" "")
  [Desktop Entry]
  Name=Emacs Client
  GenericName=Text Editor
  Comment=Edit text
  MimeType=text/english;text/plain;text/x-makefile;text/x-c++hdr;text/x-c++src;text/x-chdr;text/x-csrc;text/x-java;text/x-moc;text/x-pascal;text/x-tcl;text/x-tex;application/x-shellscript;text/x-c;text/x-c++;
  Exec=emacsclient -c %f
  Icon=emacs
  Type=Application
  Terminal=false
  Categories=Utility;TextEditor;
#+end_src

** Windows (work)
:PROPERTIES:
:header-args: :noweb-ref windows-specific
:END:

I use Windows at work, where I /also/ don't have Admin rights.  So I
kind of fly-by-night there.  Many of the ideas and scripts in this
section come from [[https://github.com/termitereform/JunkPile/blob/master/emacs-on-windows.md][termitereform]] on Github.

*** Settings

See also [[https://www.gnu.org/software/emacs/manual/html_mono/efaq-w32.html][the GNU FAQ for Windows]].  At some point I should really dig
into the multiple settings available for w32 systems.

See also [[https://github.com/bbatsov/prelude/blob/master/core/prelude-windows.el][the Prelude Windows configuration]] (modifier keys).

#+begin_src emacs-lisp
  (setq-default w32-allow-system-shell t ; enable cmd.exe as shell
                ;; modifier keys
                w32-pass-lwindow-to-system nil
                w32-lwindow-modifier 'super
                w32-pass-rwindow-to-system nil
                w32-rwindow-modifier 'super
                w32-pass-apps-to-system nil
                w32-apps-modifier 'hyper)
#+end_src

*** Scripts
:PROPERTIES:
:header-args: :noweb yes :mkdirp yes
:END:

**** Common variables

#+begin_src bat :noweb-ref w32-bat-common
  if not exist %HOME% (set HOME=%~dp0..\..)
  set EMACS=%HOME%\Applications\Emacs\bin\runemacs.exe
  set EMACSC=%HOME%\Applications\Emacs\bin\emacsclientw.exe
  set GIT=%HOME%\Applications\Git\bin\git.exe
#+end_src

**** Emacs Autostart

Either run this once at startup, or put a shortcut of it in the
Startup folder: 
=%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup=.

#+begin_src bat :tangle (if (eq system-type 'windows-nt) "~/Applications/cmd/Emacs Autostart.cmd" "")
  <<w32-bat-common>>
  REM git pull the config
  start "git" /wait %GIT% -C %HOME%\.emacs.d pull

  REM start emacs
  chdir %HOME%
  start "emacs-daemon" /wait %EMACS% --daemon
  start "emacs-client" %EMACSC% -n -c -a "" %*
#+end_src

**** Emacs Client

This will try to connect to the daemon above.  If that fails, it'll
run =runemacs.exe=.

*This is the main shortcut for running Emacs.*

#+begin_src bat :tangle (if (eq system-type 'windows-nt) "~/Applications/cmd/Emacs.cmd" "")
<<w32-bat-common>>
start "emacs" "%EMACSC%" -n -c -a "%EMACS%" %*
#+end_src

**** Emacs Daemon

#+begin_src bat :tangle (if (eq system-type 'windows-nt) "~/Applications/cmd/Emacs Daemon.cmd" "")
<<w32-bat-common>>
start "emacs-daemon" %EMACS% --daemon
#+end_src

**** Emacs Safe Start

This runs Emacs with the factory settings.

#+begin_src bat :tangle (if (eq system-type 'windows-nt) "~/Applications/cmd/Emacs Safe Start.cmd" "")
<<w32-bat-common>>
start "emacs-safe" "%EMACS%" -Q %*
#+end_src

**** Emacs Debug

This runs Emacs with the =--debug-init= option enabled.

#+begin_src bat :tangle (if (eq system-type 'windows-nt) "~/Applications/cmd/Emacs Debug.cmd" "")
<<w32-bat-common>>
start "emacs-debug" "%EMACS%" --debug-init %*
#+end_src

* Appendices

** config.el
:PROPERTIES:
:header-args: :tangle config.el :noweb yes
:END:

While =config.el= is written above, I use Noweb references to tangle
them all together in the following block, which enables me to organize
my config here /logically/, while keeping the generated file organized
/programmatically/.

*** Enable lexical binding

#+begin_src emacs-lisp
  ;;; config.el --- personal configuration -*- lexical-binding: t -*-
#+end_src

*** Header & disclaimer
:PROPERTIES:
:header-args: :noweb-ref disclaimer
:END:

#+begin_src emacs-lisp
  ;; Copyright (C) 2020 Case Duckworth

  ;; Author: Case Duckworth <acdw@acdw.net>
  ;; Created: Sometime during the Covid-19 lockdown, 2019
  ;; Keywords: configuration
  ;; URL: https://tildegit.org/acdw/emacs

  ;; This file is not part of GNU Emacs.

  ;;; Commentary:
  ;; This file is automatically tangled from config.org.
  ;; Hand edits will be overwritten!

#+end_src

*** The rest

#+begin_src emacs-lisp
  <<disclaimer>>
  ;;; Code:

  ;;; REQUIRES
  <<requires>>

  ;;; VARIABLES
  <<variables>>

  ;;; ACDW MODE
  <<acdw-mode>>

  ;;; PACKAGES
  <<packages>>

  ;;; FUNCTIONS
  <<functions>>

  ;;; SETTINGS
  <<settings>>

  ;;; SYSTEM-DEPENDENT SETTINGS
  ;; at home
  (eval-and-compile
    (when (memq system-type '(gnu gnu/linux gnu/kfreebsd))
      <<linux-specific>>
      ))

  ;; at work
  (eval-and-compile
    (when (memq system-type '(ms-dos windows-nt))
      <<windows-specific>>
      ))

  ;;; MODES
  <<modes>>

  ;;; HOOKS
  <<hooks>>

  ;;; BINDINGS
  <<bindings>>
  ;;; config.el ends here
#+end_src

*** Ease of editing
:PROPERTIES:
:header-args: :tangle no
:END:

#+begin_src emacs-lisp :noweb-ref functions
  (defun acdw/find-config ()
    "Find `config.org'."
    (interactive)
    (find-file (locate-user-emacs-file "config.org")))
#+end_src

Bind it to =C-z i= because =C-z C-c= is taken for capture.

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/leader (kbd "i") #'acdw/find-config)
#+end_src

*** Ease of reloading
:PROPERTIES:
:header-args: :tangle no
:END:

#+begin_src emacs-lisp :noweb-ref functions
  (defun acdw/reload ()
    "Tangle and reload Emacs configuration."
    (interactive)
    (let ((config (locate-user-emacs-file "config.org")))
      ;; tangle
      (with-current-buffer (find-file-noselect config)
        (message "Tangling config.org...")
        (let ((prog-mode-hook nil)
              (inhibit-redisplay t)
              (inhibit-message t))
          (add-to-list 'load-path (locate-user-emacs-file
                                   "straight/build/org/"))
          (require 'org)
          (org-babel-tangle)))
      (message "Tangling config.org... Done.")
      ;; load init files
      (load (locate-user-emacs-file "early-init.el"))
      (load (locate-user-emacs-file "init.el"))
      (load (locate-user-emacs-file "config.el"))))
#+end_src

#+begin_src emacs-lisp :noweb-ref bindings
  (define-key acdw/leader (kbd "C-M-r") #'acdw/reload)
#+end_src

** init.el
:PROPERTIES:
:header-args: :tangle init.el :noweb yes
:END:

The classic Emacs initiation file.

*** Header

#+begin_src emacs-lisp
  ;;; init.el -*- lexical-binding: t -*-
  <<disclaimer>>
  ;;; Code:
#+end_src

*** Prefer newer files to older files

#+begin_src emacs-lisp
  (setq-default load-prefer-newer t)
#+end_src

*** Load the config

I keep most of my config in =config.el=, which is tangled directly from
this file.  This init just loads that file, either from lisp 
or directly from Org if it's newer.  /Note/ the longish comment before
the =unless= form -- it was pretty tough for me to wrap my head around
the needed boolean expression to tangle config.org.  Booleans, yall!

#+begin_src emacs-lisp
  (let* (;; Speed up init
         (gc-cons-threshold most-positive-fixnum)
         (file-name-handler-alist nil)
         ;; Config file names
         (config (expand-file-name "config"
                                   user-emacs-directory))
         (config.el (concat config ".el"))
         (config.org (concat config ".org"))
         (straight-org-dir (locate-user-emacs-file "straight/build/org")))
    ;; Okay, let's figure this out.
    ;; `and' evaluates each form, and returns nil on the first that
    ;; returns nil.  `unless' only executes its body if the test
    ;; returns nil.  So.
    ;; 1. Test if config.org is newer than config.el.  If it is (t), we
    ;;    *want* to evaluate the body, so we need to negate that test.
    ;; 2. Try to load the config.  If it errors (nil), it'll bubble that
    ;;    to the `and' and the body will be evaluated.
    (unless (and (not (file-newer-than-file-p config.org config.el))
                 (load config :noerror))
      ;; A plain require here just loads the older `org'
      ;; in Emacs' install dir.  We need to add the newer
      ;; one to the `load-path', hopefully that's all.
      (when (file-exists-p straight-org-dir)
        (add-to-list 'load-path straight-org-dir))
      ;; Load config.org
      (require 'org)
      (org-babel-load-file config.org)))

  ;;; init.el ends here
#+end_src

** early-init.el
:PROPERTIES:
:header-args: :tangle early-init.el :noweb yes
:END:

Beginning with 27.1, Emacs also loads an =early-init.el= file, before
the package manager or the UI code.  The Info says we should put as
little as possible in this file, so I only have what I need.

#+begin_src emacs-lisp
  ;;; early-init.el -*- no-byte-compile: t; -*-
  <<disclaimer>>
  ;;; Code:

  ;; BOOTSTRAP PACKAGE MANAGEMENT
  <<early-init-package>>
  ;; SETUP FRAME
  <<early-init-frame>>

  ;;; early-init.el ends here
#+end_src

** License
:PROPERTIES:
:header-args: :tangle LICENSE
:END:

Copyright © 2020 Case Duckworth <acdw@acdw.net>

This work is free.  You can redistribute it and/or modify it under the
terms of the Do What the Fuck You Want To Public License, Version 2,
as published by Sam Hocevar.  See the =LICENSE= file, tangled from the
following source block, for details.

#+begin_src text
  DO WHAT THE FUCK YOU WANT TO PUBLIC LICENSE

  Version 2, December 2004

  Copyright (C) 2004 Sam Hocevar <sam@hocevar.net>

  Everyone is permitted to copy and distribute verbatim or modified copies of
  this license document, and changing it is allowed as long as the name is changed.

  DO WHAT THE FUCK YOU WANT TO PUBLIC LICENSE

  TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

  0. You just DO WHAT THE FUCK YOU WANT TO.
#+end_src

*** Note on the license

It's highly likely that the WTFPL is completely incompatible with the
GPL, for what should be fairly obvious reasons.  To that, I say:

*SUE ME, RMS!*

** Inspiration and further reading

- [[https://github.com/bbatsov/prelude][Emacs Prelude]]
- [[https://github.com/alphapapa/unpackaged.el][Unpackaged]]