path: root/bollux

#!/usr/bin/env bash
################################################################################
# BOLLUX: a bash gemini client
# Author: Case Duckworth
# License: MIT
# Version: 0.4.1
#
# Commentary:
#
# The impetus for this program came from a Mastodon conversation I had where
# someone mentioned the "simplest possible Gemini client" was this:
#
# openssl  s_client -ign_eof -quiet -connect $server:1965 <<< "$url"
#
# That's still at the heart of this program (see `gemini_request'): `bollux' is
# basically a half-functioning convenience wrapper around that openssl call.
# The first versions of `bollux' used `gawk' and a lot of other tools on top of
# bash, but after reading Dylan Araps' Pure Bash Bible[1] and other works, I
# decided to make as much of it in Bash as possible.  Thus, currently `bollux'
# requires `bash' v. 4+, `less' (a recent, non-busybox version), `dd' for
# downloads, `openssl' for requests, and `iconv' to convert pages to UTF-8.
# Future versions will hopefully have a pager fully implemented in bash, so that
# I won't have to worry about less's weird incompatibilities and keybinding
# things.  That's a major project though, and I'm scared.
#
# The following works were referenced when writing this, and I've tried to
# credit them in comments below.  Further in the commentary on this script, I'll
# include the following link numbers to refer to these documents, in order to
# keep the line length as short as possible.
#
# [1]: Pure Bash Bible
#      https://github.com/dylanaraps/pure-bash-bible
# [2]: URL Specification
#      https://tools.ietf.org/html/rfc3986
# [3]: Gemini Specification
#      https://gemini.circumlunar.space/docs/specification.html
# [4]: Gemini Best Practices
#      https://gemini.circumlunar.space/docs/best-practices.gmi
# [5]: Gemini FAQ
#      https://gemini.circumlunar.space/docs/faq.gmi
# [6]: Gopher Specification
#      https://tools.ietf.org/html/rfc1436
# [7]: Gopher URLs
#      https://tools.ietf.org/html/rfc4266
# [8]: Gophermap to Gemini script (by tomasino)
# https://github.com/jamestomasino/dotfiles-minimal/blob/master/bin/gophermap2gemini.awk
# [9]: OpenSSL `s_client' online manual
#      https://www.openssl.org/docs/manmaster/man1/openssl-s_client.html
#
################################################################################
# Code:

# Program information
PRGN="${0##*/}" # Easiest way to get the script name
VRSN=0.4.1      # I /try/ to follow semver?  IDK.

# Print a useful help message (`bollux -h').
bollux_usage() {
	cat <<END
$PRGN (v. $VRSN): a bash gemini client
usage:
	$PRGN [-h]
	$PRGN [-q] [-v] [URL]
flags:
	-h	show this help and exit
	-q	be quiet: log no messages
	-v	be verbose: log more messages
parameters:
	URL	the URL to start in
		If not provided, the user will be prompted.
END
}

# Main entry point into `bollux'.
#
# See the `if' block at the bottom of this script.
bollux() {
	run bollux_config    # TODO: figure out better config method
	run bollux_args "$@" # and argument parsing
	run bollux_init

	# If the user hasn't configured a home page, $BOLLUX_URL will be blank.
	# So, prompt the user where to go.
	if [[ ! "${BOLLUX_URL:+x}" ]]; then
		run prompt GO BOLLUX_URL
	fi
	log d "BOLLUX_URL='$BOLLUX_URL'"

	run blastoff -u "$BOLLUX_URL" # Visit the specified URL.
}

# Process command-line arguments.
bollux_args() {
	while getopts :hvq OPT; do
		case "$OPT" in
		h)
			bollux_usage
			exit
			;;
		v) BOLLUX_LOGLEVEL=DEBUG ;;
		q) BOLLUX_LOGLEVEL=QUIET ;;
		:) die 1 "Option -$OPTARG requires an argument" ;;
		*) die 1 "Unknown option: -$OPTARG" ;;
		esac
	done
	shift $((OPTIND - 1))

	# If there's a leftover argument, it's the URL to visit.
	if (($# == 1)); then
		BOLLUX_URL="$1"
	fi
}

# Source the configuration file and set remaining variables.
#
# Since `bollux_config' is loaded before `bollux_args', there's no way to
# specify a configuration file from the command line.  I run `bollux_args'
# second so that command-line options (mostly $BOLLUX_URL) can supersede
# config-file options, and I'm not sure how to rectify the situation.
#
# Anyway, the config file `bollux.conf' is just a bash file that's sourced in
# this function.  After that, I use a little bash trick to set all the remaining
# variables to default values with `: "${VAR:=value}"'.
bollux_config() {
	: "${BOLLUX_CONF_DIR:=${XDG_CONFIG_HOME:-$HOME/.config}/bollux}"
	: "${BOLLUX_CONFIG:=$BOLLUX_CONF_DIR/bollux.conf}"

	if [ -f "$BOLLUX_CONFIG" ]; then
		log debug "Loading config file '$BOLLUX_CONFIG'"
		# Shellcheck gets mad when we try to source a file behind a
		# variable -- it doesn't know where it is.  This line ignores
		# that warning, since the user can put $BOLLUX_CONFIG wherever.
		# shellcheck disable=1090
		. "$BOLLUX_CONFIG"
	else
		# It's an error if bollux can't find the config file, but I
		# don't want to kill the program over it.
		log error "Can't load config file '$BOLLUX_CONFIG'."
	fi

	## behavior
	: "${BOLLUX_TIMEOUT:=30}"                      # connection timeout
	: "${BOLLUX_MAXREDIR:=5}"                      # max redirects
	: "${BOLLUX_PROTO:=gemini}"                    # default protocol
	: "${BOLLUX_GEMINI_PORT:=1965}"                # default port for gemini
	: "${BOLLUX_GOPHER_PORT:=70}"                  # default port for gopher
	: "${BOLLUX_URL:=}"                            # start url
	: "${BOLLUX_BYEMSG:=See You Space Cowboy ...}" # bye message
	## lesskeys
	: "${KEY_OPEN:=o}"      # prompt for a link to open
	: "${KEY_GOTO:=g}"      # prompt for a page to 'goto'
	: "${KEY_GOTO_FROM:=G}" # goto a page with current prefilled
	: "${KEY_BACK:=[}"      # go back in the history
	: "${KEY_FORWARD:=]}"   # go forward in the history
	: "${KEY_REFRESH:=r}"   # refresh the page
	: "${KEY_CYCLE_PRE:=p}" # cycle T_PRE_DISPLAY
	: "${BOLLUX_CUSTOM_LESSKEY:=$BOLLUX_CONF_DIR/bollux.lesskey}"
	## files
	: "${BOLLUX_DATADIR:=${XDG_DATA_HOME:-$HOME/.local/share}/bollux}"
	: "${BOLLUX_DOWNDIR:=.}"                       # where to save downloads
	: "${BOLLUX_LESSKEY:=$BOLLUX_DATADIR/lesskey}" # where to store binds
	: "${BOLLUX_PAGESRC:=$BOLLUX_DATADIR/pagesrc}" # where to save source
	BOLLUX_HISTFILE="$BOLLUX_DATADIR/history"      # where to save history
	## typesetting
	: "${T_MARGIN:=4}" # left and right margin
	: "${T_WIDTH:=0}"  # width of the view port
	# 0 = get term width
	: "${T_PRE_DISPLAY:=both,pre,alt}" # how to view PRE blocks
	# colors -- these will be wrapped in \e[ __ m
	C_RESET='\e[0m'         # reset
	: "${C_SIGIL:=35}"      # sigil (=>, #, ##, ###, *, ```)
	: "${C_LINK_NUMBER:=1}" # link number
	: "${C_LINK_TITLE:=4}"  # link title
	: "${C_LINK_URL:=36}"   # link URL
	: "${C_HEADER1:=1;4}"   # header 1 formatting
	: "${C_HEADER2:=1}"     # header 2 formatting
	: "${C_HEADER3:=3}"     # header 3 formatting
	: "${C_LIST:=0}"        # list formatting
	: "${C_QUOTE:=3}"       # quote formatting
	: "${C_PRE:=0}"         # preformatted text formatting
	## state
	UC_BLANK=':?:' # internal use only, should be non-URL chars
}

# Initialize bollux state
bollux_init() {
	# Trap `bollux_cleanup' on quit and exit
	trap bollux_cleanup INT QUIT EXIT
	# Trap `bollux_quit' on interrupt (C-c)
	trap bollux_quit SIGINT

	# Disable pathname expansion.
	#
	# It's very unlikely the user will want to navigate to a file when
	# answering the GO prompt.
	set -f

	# Initialize state
	#
	# Other than $REDIRECTS, bollux's mutable state includes
	# $BOLLUX_URL, but that's initialized elsewhere (possibly even by
	# the user)
	REDIRECTS=0

	# History
	#
	# See also `history_append', `history_back', `history_forward'
	declare -a HISTORY # history is kept in an array
	HN=0               # position of history in the array
	run mkdir -p "${BOLLUX_HISTFILE%/*}"

	# Remove $BOLLUX_LESSKEY and re-generate keybindings (to catch rebinds)
	run rm -f "$BOLLUX_LESSKEY"
}

# Cleanup on exit
bollux_cleanup() {
	# Stubbed in case of need in future
	:
}

# Exit with success, printing a fun message.
#
# The default message is from the wonderful show "Cowboy Bebop."
bollux_quit() {
	printf '\e[1m%s\e[0m:\t\e[3m%s\e[0m\n' "$PRGN" "$BOLLUX_BYEMSG"
	exit
}

# UTILITY FUNCTIONS ############################################################

# Run a command, but log it first.
#
# See `log' for the available levels.
run() { # run COMMAND...
	# I have to add a `trap' here for SIGINT to work properly.
	trap bollux_quit SIGINT
	LOG_FUNC=2 log debug "> $*"
	"$@"
}

# Log a message to stderr (&2).
#
# `log' in this script can take 3 different parameters: `d', `e', and `x', where
# `x' is any other string (though I usually use `x'), followed by the message to
# log.  Most messages are either `d' (debug) level or `x' (diagnostic) level,
# meaning I want to show them all the time or only when bollux is called with
# `-v' (verbose).  The levels are somewhat arbitrary, like I suspect all logging
# levels are, but you can read the rest of bollux to see what I've chosen to
# classify as what.
log() { # log LEVEL MESSAGE...
	# 'QUIET' means don't log anything.
	[[ "$BOLLUX_LOGLEVEL" == QUIET ]] && return
	local fmt # ANSI escape code

	case "$1" in
	[dD]*) # Debug level -- only print if bollux -v.
		[[ "$BOLLUX_LOGLEVEL" == DEBUG ]] || return
		fmt=34 # Blue
		;;
	[eE]*)  # Error level -- always print.
		fmt=31 # Red
		;;
	*)     # Diagnostic level -- print unless QUIET.
		fmt=1 # Bold
		;;
	esac
	shift

	printf >&2 '\e[%sm%s:%-16s:\e[0m %s\n' \
		"$fmt" "$PRGN" "${FUNCNAME[${LOG_FUNC:-1}]}" "$*"
}

# Exit with an error and a message describing it.
die() { # die EXIT_CODE MESSAGE
	local exit_code="$1"
	shift
	log error "$*"
	exit "$exit_code"
}

# Trim leading and trailing whitespace from a string.
#
# [1]: #trim-leading-and-trailing-white-space-from-string
trim_string() { # trim_string STRING
	: "${1#"${1%%[![:space:]]*}"}"
	: "${_%"${_##*[![:space:]]}"}"
	printf '%s\n' "$_"
}

# Cycle a variable in a list given a delimiter.
#
# e.g. 'list_cycle one,two,three ,' => 'two,three,one'
list_cycle() { # list_cycle LIST<string> DELIM
	# I could've set up `list_cycle' to use an array instead of a delimited
	# string, but the one variable this function is used for is
	# T_PRE_DISPLAY, which is user-configurable.  I wanted it to be as easy
	# to configure for users who might not immediately know the bash array
	# syntax, but can figure out 'variable=value' without much thought.
	local list="${!1}"               # Pass the list by name, not value
	local delim="$2"                 # The delimiter of the string
	local first="${list%%${delim}*}" # The first element
	local rest="${list#*${delim}}"   # The rest of the elements
	# -v prints to the variable specified.
	printf -v "$1" '%s%s%s' "${rest}" "${delim}" "${first}"
}

# Set the terminal title.
set_title() { # set_title TITLE...
	printf '\e]2;%s\007' "$*"
}

# Prompt the user for input.
#
# This is a thin wrapper around `read', a bash built-in.  Because of the
# way bollux messes around with stdin and stdout, I need to read directly from
# the TTY with this function.
prompt() { # prompt [-u] PROMPT [READ_ARGS...]
	# `-e' gets the line "interactively", so it can see history and stuff
	# `-r' reads a "raw" string, i.e., without backslash escaping
	local read_cmd=(read -e -r)
	if [[ "$1" == "-u" ]]; then
		# `-i TEXT' uses TEXT as the initial text for `read'
		read_cmd+=(-i "$BOLLUX_URL")
		shift
	fi
	local prompt="$1" # How to prompt the user
	shift
	read_cmd+=(-p "$prompt> ")
	"${read_cmd[@]}" </dev/tty "$@"
}

# Bash built-in replacement for `cat'
#
# One of the more pedantic bits of bollux (is 'pedantic' the right word?) --
# `cat' is more than likely installed on any system with bash, so this function
# is really just here so I can say that bollux is written as purely in bash as
# possible.
passthru() {
	while IFS= read -r; do
		printf '%s\n' "$REPLY"
	done
}

# Bash built-in replacement for `sleep'
#
# The commentary for `passthru' applies here as well, though I didn't write this
# function -- Dylan Araps did.
#
# [1]: #use-read-as-an-alternative-to-the-sleep-command
sleep() { # sleep SECONDS
	read -rt "$1" <> <(:) || :
}

# Normalize files.
normalize() {
	shopt -s extglob # for the printf call below
	while IFS= read -r; do
		# Normalize line endings to Unix-style (LF)
		printf '%s\n' "${REPLY//$'\r'?($'\n')/}"
	done
	shopt -u extglob # reset 'extglob'
}

# URLS #########################################################################
# https://tools.ietf.org/html/rfc3986 [2]
#
# Most of these functions are Bash implementations of functionality laid out in
# the linked RFC specification.  I'll refer to the section numbers above each
# function.
#
# In addition, most of these functions take arrays or array elements passed /by
# name/, instead of /value/ -- i.e., instead of calling `usplit $url', call
# `usplit url'.  Passing values by name is necessary because of Bash's weird
# array handling.
#
################################################################################

# Make sure a URL is "well-formed:" add a default protocol if it's missing and
# trim whitespace.
#
# Useful for URLs that were probably input by humans.
uwellform() { # uwellform URL
	local url="$1"

	if [[ "$url" != *://* ]]; then
		url="$BOLLUX_PROTO://$url"
	fi

	url="$(trim_string "$url")"

	printf '%s\n' "$url"
}

# Split a URL into its constituent parts, placing them all in the given array.
#
# The regular expression given at the top of the function ($re) is taken
# directly from [2] Appendix B -- and if the URL provided doesn't match it, the
# function bails.
#
# `usplit' takes advantage of bash's regex abilities: when the regex comparison
# operator `=~' is used, bash populates the array $BASH_REMATCH with the groups
# matched, and ${BASH_REMATCH[0]} is the entirety of the match.  So `usplit'
# takes the matched URL, splits it using the regex, then assigns each part to an
# element of the url array NAME by using `printf -v', which prints to a
# variable.
usplit() { # usplit URL_ARRAY<name> URL
	# Note: URL_ARRAY isn't assigned in `usplit', because it should
	# already exist.  Pass /only/ the name of URL_ARRAY to this
	# function, not its contents.
	local re='^(([^:/?#]+):)?(//([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))?'
	local u="$2"
	[[ "$u" =~ $re ]] || {
		exit_code=$?
		log error "usplit: '$2' doesn't match '$re'"
		return $?
	}

	# ShellCheck doesn't see that I'm using these variables in the `for'
	# loop below, because I'm not technically using them /as/ variables, but
	# as names to the variables.  The ${!c} formation in the `printf' call
	# below performs a reverse lookup on the name to get the actual data.
	# shellcheck disable=2034
	local entire_url="${BASH_REMATCH[0]}" \
		scheme="${BASH_REMATCH[2]}" \
		authority="${BASH_REMATCH[4]}" \
		path="${BASH_REMATCH[5]}" \
		query="${BASH_REMATCH[7]}" \
		fragment="${BASH_REMATCH[9]}"

	# Iterate through the 5 components of a URL and assign them to elements
	# of URL_ARRAY, as follows:
	# 0=url 1=scheme 2=authority 3=path 4=query 5=fragment
	run printf -v "$1[0]" '%s' "$entire_url"
	# This loop tests whether the component exists first -- if it
	# doesn't, the special variable $UC_BLANK is used in the spot
	# instead.  Bash doesn't have a useful way of differentiating an
	# /unset/ element of an array, versus an /empty/ element.
	# The only exception is that 'path' component, which always exists
	# in a URL (I think the simplest URL possible is '/', the empty
	# path).
	local i=1 # begin at 1 -- the full URL is [0].
	for c in scheme authority path query fragment; do
		if [[ "${!c}" || "$c" == path ]]; then
			run printf -v "$1[$i]" '%s' "${!c}"
		else
			run printf -v "$1[$i]" '%s' "$UC_BLANK"
		fi
		((i += 1))
	done

}

# Join a URL array, split with `usplit', back into a string, assigning
# it to the 0th element of the array.
ujoin() { # ujoin URL_ARRAY<name>
	# Here's the documentation for local's '-n' flag:
	#
	# Give each name the nameref attribute, making it a name reference
	# to another variable. That other variable is defined by the value of
	# name. All references, assignments, and attribute modifications to
	# name, except for those using or changing the -n attribute itself,
	# are performed on the variable referenced by name's value. The
	# nameref attribute cannot be applied to array variables.
	#
	# Pretty handy for passing-by-name!  Except that last part -- "The
	# nameref attribute cannot be applied to array variables."  However,
	# I've found a clever hack -- you can use 'printf -v' to print the
	# value to the array element.
	local -n URL_ARRAY="$1"

	# For each possible URL component, check if it exists with `ucdef'.
	# If it does, append it (with the correct component delimiter) to
	# URL_ARRAY[0].
	if ucdef URL_ARRAY[1]; then
		printf -v URL_ARRAY[0] "%s:" "${URL_ARRAY[1]}"
	fi

	# Need special casing for file: protocol:
	# https://datatracker.ietf.org/doc/html/rfc1738#section-3.10
	if ucdef URL_ARRAY[2] || [[ "${URL_ARRAY[1]}" == file ]]; then
		printf -v URL_ARRAY[0] "${URL_ARRAY[0]}//%s" "${URL_ARRAY[2]}"
	fi

	# The path component is required.
	printf -v URL_ARRAY[0] "${URL_ARRAY[0]}%s" "${URL_ARRAY[3]}"

	if ucdef URL_ARRAY[4]; then
		printf -v URL_ARRAY[0] "${URL_ARRAY[0]}?%s" "${URL_ARRAY[4]}"
	fi

	if ucdef URL_ARRAY[5]; then
		printf -v URL_ARRAY[0] "${URL_ARRAY[0]}#%s" "${URL_ARRAY[5]}"
	fi

	log d "${URL_ARRAY[0]}"
}

# `ucdef' checks whether a URL component is blank or not -- if a component
# doesn't exist, `usplit' writes $UC_BLANK there instead (which is :?: by
# default, though it really doesn't matter much *what* it is, as long as it's
# not going to really be in a URL).  I tried really hard to differentiate an
# unset array element from a simply empty one, but like, as far as I could tell,
# you can't do that in Bash.
ucdef() { # ucdef COMPONENT<name>
	local component="$1"
	[[ "${!component}" != "$UC_BLANK" ]]
}

# `ucblank' determines whether a URL component is blank (""), as opposed to
# undefined.
ucblank() { # ucblank COMPONENT<name>
	local component="$1"
	[[ -z "${!component}" ]]
}

# `ucset' sets one component of a URL array and setting the 0th element to the
# new full URL.  Use it instead of directly setting the array element with U[x],
# because U[0] will fall out of sync with the rest of the contents.
ucset() {                       # ucset URL_ARRAY_INDEX<name> NEW_VALUE
	local url_array_component="$1" # Of form 'URL_ARRAY[INDEX]'
	local value="$2"

	# Assign $value to $url_array_component.
	#
	# Wrapped in an 'eval' for the extra layer of indirection.
	run eval "${url_array_component}='$value'"

	# Rejoin the URL_ARRAY with the changed value.
	#
	# The substitution here strips the array index subscript (i.e.,
	# URL[4] => URL), passing the name of the full array to `ujoin'.
	run ujoin "${url_array_component/\[*\]/}"
}

# [1]: Encode a URL using percent-encoding.
uencode() { # uencode URL
	local LC_ALL=C
	for ((i = 0; i < ${#1}; i++)); do
		: "${1:i:1}"
		case "$_" in
		[a-zA-Z0-9.~_-]) printf '%s' "$_" ;;
		*) printf '%%%02X' "'$_" ;;
		esac
	done
	printf '\n'
}

# [1]: Decode a percent-encoded URL.
udecode() { # udecode URL
	: "${1//+/ }"
	printf '%b\n' "${_//%/\\x}"
}

# Implement [2]: 5.2.4, "Remove Dot Segments".
pundot() { # pundot PATH
	local input="$1"
	local output
	while [[ "$input" ]]; do
		if [[ "$input" =~ ^\.\.?/ ]]; then
			input="${input#${BASH_REMATCH[0]}}"
		elif [[ "$input" =~ ^/\.(/|$) ]]; then
			input="/${input#${BASH_REMATCH[0]}}"
		elif [[ "$input" =~ ^/\.\.(/|$) ]]; then
			input="/${input#${BASH_REMATCH[0]}}"
			[[ "$output" =~ /?[^/]+$ ]]
			output="${output%${BASH_REMATCH[0]}}"
		elif [[ "$input" == . || "$input" == .. ]]; then
			input=
		else
			[[ $input =~ ^(/?[^/]*)(/?.*)$ ]] || return 1
			output="$output${BASH_REMATCH[1]}"
			input="${BASH_REMATCH[2]}"
		fi
	done
	printf '%s\n' "${output//\/\//\//}"
}

# Implement [2] Section 5.2.3, "Merge Paths".
pmerge() { # pmerge BASE_PATH<name> REFERENCE_PATH<name>
	local -n base_path="$1"
	local -n reference_path="$2"

	if ucblank reference_path[3]; then
		printf '%s\n' "${base_path[3]//\/\//\//}"
		return
	fi

	if ucdef base_path[2] && ucblank base_path[3]; then
		printf '/%s\n' "${reference_path[3]//\/\//\//}"
	else
		local bp=""
		if [[ "${base_path[3]}" == */* ]]; then
			bp="${base_path[3]%/*}"
		fi
		printf '%s/%s\n' "${bp%/}" "${reference_path[3]#/}"
	fi
}

# `utransform' implements [2]6 Section 5.2.2, "Transform Resources."
#
# That section conveniently lays out a pseudocode algorithm describing how URL
# resources should be transformed from one to another.  This function just
# implements that pseudocode in Bash, using the helper functions defined above.
utransform() {   # utransform TARGET:ARRAY BASE:STRING REFERENCE:STRING
	local -a B R    # base, reference
	local -n T="$1" # target
	usplit B "$2"
	usplit R "$3"

	# initialize T
	for ((i = 1; i <= 5; i++)); do
		T[$i]="$UC_BLANK"
	done

	# 0=url 1=scheme 2=authority 3=path 4=query 5=fragment
	if ucdef R[1]; then
		T[1]="${R[1]}"
		if ucdef R[2]; then
			T[2]="${R[2]}"
		fi
		if ucdef R[3]; then
			T[3]="$(pundot "${R[3]}")"
		fi
		if ucdef R[4]; then
			T[4]="${R[4]}"
		fi
	else
		if ucdef R[2]; then
			T[2]="${R[2]}"
			if ucdef R[2]; then
				T[3]="$(pundot "${R[3]}")"
			fi
			if ucdef R[4]; then
				T[4]="${R[4]}"
			fi
		else
			if ucblank R[3]; then
				T[3]="${B[3]}"
				if ucdef R[4]; then
					T[4]="${R[4]}"
				else
					T[4]="${B[4]}"
				fi
			else
				if [[ "${R[3]}" == /* ]]; then
					T[3]="$(pundot "${R[3]}")"
				else
					T[3]="$(pmerge B R)"
					T[3]="$(pundot "${T[3]}")"
				fi
				if ucdef R[4]; then
					T[4]="${R[4]}"
				fi
			fi
			T[2]="${B[2]}"
		fi
		T[1]="${B[1]}"
	fi
	if ucdef R[5]; then
		T[5]="${R[5]}"
	fi

	ujoin T
}

# GEMINI #######################################################################
# https://gemini.circumlunar.space/docs/specification.html [3]
#
# The reason we're all here, folks.  Gemini is a new protocol that aims to be a
# middle ground between Gopher and HTTP, blah blah.  You know the spiel.  I know
# the spiel.  It's great stuff!
#
################################################################################

# Request a resource from a gemini server - see [3] Sections 2, 4.
gemini_request() { # gemini_request URL
	local -a url
	run usplit url "$1"
	log debug "${url[@]}"

	# Remove user info from the URL.
	#
	# URLs can technically be of the form <proto>://<user>:<pass>@<domain>
	# (see [2] Section 3.2, "Authority").  I don't know of any Gemini servers
	# that use the <user> or <pass> parts, so `gemini_request' just strips
	# them from the requested URL.  This will need to be changed if servers
	# decide to use this method of authentication.
	log debug "Removing user info from the URL"
	run ucset url[2] "${url[2]#*@}"

	# Determine the port to request.
	#
	# The default port for Gemini is 1965 (the year of the first Gemini
	# space mission), but some servers use a different port.  In a URL, a
	# port can be specified after the domain, separated with a colon.  The
	# user can also request a different default port, for whatever reason,
	# by setting the variable $BOLLUX_GEMINI_PORT.
	log debug "Determining the port to request"
	local port
	if [[ "${url[2]}" == *:* ]]; then
		port="${url[2]#*:}"
		ucset url[2] "${url[2]%:*}"
	else
		port="$BOLLUX_GEMINI_PORT"
	fi

	# Build the SSL command to request the resource.
	#
	# This is the beating heart of bollux, the command that does all the
	# important work of actually fetching the gemini content the user wants
	# to read.  I've broken it out into an array for ease of editing (and
	# now, commenting!).
	local ssl_cmd=(
		# `s_client' is OpenSSL's reference client implementation In the
		# manual [9] it says not to use it, but who reads the manual,
		# anyway?
		openssl s_client
		-crlf  # Automatically add CR+LF to line
		-quiet # Don't print all the cert stuff
		# -ign_eof                     # `-quiet' implies `-ign_eof'
		-connect "${url[2]}:$port"   # The server and port to connect
		-servername "${url[2]}"      # SNI: Server Name Identification
		-no_ssl3 -no_tls1 -no_tls1_1 # disable old TLS/SSL versions
	)

	# Actually request the resource.
	#
	# I could probably use 'printf '%s\r\n' "$url" | run "${ssl_cmd[@]}",
	# and maybe I should.  I wrote this little line a while ago.
	run "${ssl_cmd[@]}" <<<"$url"
}

# Handle the gemini response - see [3] Section 3.
gemini_response() { # gemini_response URL
	local code meta    # received on the first line of the response
	local title        # determined by a clunky heuristic, see read loop: (2*)
	local url="$1"     # the currently-visited URL.

	# Read the first line.
	#
	# The first line of a Gemini response is the "header line," which is of
	# the format "STATUS METADATA\r\n".  I use a `while' loop using `read'
	# with a timeout to handle non-responsive servers.  Technically,
	# METADATA shouldn't exceed 1024 bytes, but I can't think of a good way
	# to break at that point -- so bollux is not quite spec-compliant in
	# this regard.
	#
	# Additionally, there are sometimes bugs with caching and
	# byte-shifting(?) when trying to download a binary file (see
	# `download', below), but I'm not sure how to remedy that issue either.
	# It requires more research.
	while read -t "$BOLLUX_TIMEOUT" -r code meta ||
		{ (($? > 128)) && die 99 "Timeout."; }; do
		break
	done
	log d "[$code] $meta"

	# Branch depending on the status code.  See [3] Appendix 1.
	#
	# Notes:
	# - All codes other than 3* (Redirects) reset the REDIRECTS counter.
	# - I branch on the first digit of the status code, instead of both, to
	#   minimize the amount of duplicated code I need to write.
	case "$code" in
	1*) # INPUT
		# Gemini allows GET-style requests, and the INPUT family of
		# response codes facilitate them.  `10' is for standard input,
		# and `11' is for sensitive information, like passwords.
		REDIRECTS=0
		BOLLUX_URL="$url"
		case "$code" in
		10) run prompt "$meta" ;;
		11) run prompt "$meta" -s ;; # sensitive input
		esac
		run history_append "$url" "${title:-}"
		run blastoff "?$(uencode "$REPLY")"
		;;
	2*) # OK
		# The `20' family of requests is like HTTP's `200' family: it
		# means that the request worked and the server is sending the
		# requested content.
		REDIRECTS=0
		BOLLUX_URL="$url"
		# Janky heuristic to guess the title of a page.
		#
		# This while loop reads through the file looking for a line
		# starting with `#', which is a level-one heading in text/gemini
		# (see [3] Section 5).  It assumes that the first such heading is the
		# title of the page, and uses that title for the terminal title
		# and for the history.
		local pretitle
		while read -r; do
			# Since looping through the file consumes it (that is,
			# the file pointer (I think?) moves away from the
			# beginning of the file), the content we've read so far
			# must be saved in a `pretitle' variable, so it can be
			# printed later with the rest of the page.
			pretitle="$pretitle$REPLY"$'\n'
			if [[ "$REPLY" =~ ^#[[:space:]]*(.*) ]]; then
				title="${BASH_REMATCH[1]}"
				break
			fi
		done
		run history_append "$url" "${title:-}"
		# Print the pretitle and the rest of the document (`passthru' is
		# a pure-bash rewrite of `cat'), and pipe it through `display'
		# for typesetting.
		{
			printf '%s' "$pretitle"
			passthru
		} | run display "$meta" "${title:-}"
		;;
	3*) # REDIRECT
		# Redirects are a fundamental part of any hypertext framework,
		# and if I remember correctly, one of the main reasons
		# solderpunk and others began thinking about gemini (the others
		# being TLS and URLs, I believe).
		#
		# Note that although [3] specifies both a temporary (30) and
		# permanent (31) redirect, bollux isn't smart enough to make a
		# distinction.  I'm not sure what the difference would be in
		# practice, anyway.
		#
		# Per [4] bollux limits the number of redirects a page is
		# allowed to make (by default, five).  Change `$BOLLUX_MAXREDIR'
		# to customize that limit.
		((REDIRECTS += 1))
		if ((REDIRECTS > BOLLUX_MAXREDIR)); then
			die $((100 + code)) "Too many redirects!"
		fi
		BOLLUX_URL="$url"
		# Another discussion on [4] pertains to the value of alerting
		# the user to (A) a cross-domain redirect, or even (B) all
		# redirects.  I have yet to implement that particular
		# functionality, and even when I do implement it I don't think
		# (B) will be the default.  Perhaps (A) though.  No notification
		# will also be an option, however.
		run blastoff "$meta" # TODO: confirm redirect
		;;
	4*) # TEMPORARY ERROR
		# Since the 4* codes ([3] Appendix 1) are all server issues,
		# bollux can treat them all basically the same.  This is an area
		# that could use some expansion.
		local desc="Temporary error"
		case "$code" in
		41) desc+=" (server unavailable)" ;;
		42) desc+=" (CGI error)" ;;
		43) desc+=" (proxy error)" ;;
		44) desc+=" (slow down)" ;; # could be particularly improved
		esac
		REDIRECTS=0
		die "$((100 + code))" "$desc [$code]: $meta"
		;;
	5*) # PERMANENT ERROR
		# The situation with the 5* codes is basically similar to the 4*
		# codes.  It could maybe use more thought as to what behavior to
		# implement.  Maybe adding the (bad) requests to history,
		# subject to configuration?
		local desc="Permanent failure"
		case "$code" in
		51) desc+=" (not found)" ;;
		52) desc+=" (gone)" ;;
		53) desc+=" (proxy request refused)" ;;
			# For some reason, codes 54--58 inclusive aren't used.
		59) desc+=" (bad request)" ;;
		esac
		REDIRECTS=0
		die "$((100 + code))" "$desc [$code]: $meta"
		;;
	6*) # CERTIFICATE ERROR (TODO)
		# Dealing with certificates is honestly the most important
		# feature missing from bollux to get it to 1.0.  Right now,
		# bollux deals with 6* status codes identically to 4* and 5*
		# codes.  This is not ideal, in the slightest.
		local desc="Client certificate required"
		case "$code" in
		61) desc+=" (certificate not authorized)" ;;
		62) desc+=" (certificate not valid)" ;;
		esac
		REDIRECTS=0
		log d "Not implemented: Client certificates"
		die "$((100 + code))" "[$code] $meta"
		;;
	*) # UNKNOWN
		# Just in case we get a weird, un-spec-compliant status code.
		[[ -z "${code-}" ]] && die 100 "Empty response code."
		die "$((100 + code))" "Unknown response code: $code."
		;;
	esac
}

# GOPHER #######################################################################
# https://tools.ietf.org/html/rfc1436 protocol
# https://tools.ietf.org/html/rfc4266 url
#
# Gopher is the grand-daddy of gemini (or maybe just weird uncle? hm..),
# invented in 1991 as a fancier FTP.  There's been a sort of resurgence in it as
# a consequence of the shittifying of the WWW, but it's shown its age (which is
# why Gemini was born).  But why am I telling you this?  You're reading the
# source code of a Gemini browser!  You're a meganerd just like me.  Welcome to
# the club, kid.
#
# Since gopher is so old, it actually has two RFCs: RFC 1436 [6] for the
# protocol itself, and RFC 4266 [7] for the URL format (gopher predates the
# URL!).  However, requesting and handling responses is still fundamentally the
# same to gemini, so it was pretty easy to implement this.  I don't think bollux
# handles all the possible item types, but it should get the main ones.
#
################################################################################

# Request a resource.
gopher_request() { # gopher_request URL
	local url="$1"

	# [7] Section 2.1
	[[ "$url" =~ gopher://([^/?#:]*)(:([0-9]+))?(/((.))?(/?.*))?$ ]]
	local server="${BASH_REMATCH[1]}" \
		port="${BASH_REMATCH[3]:-$BOLLUX_GOPHER_PORT}" \
		type="${BASH_REMATCH[6]:-1}" \
		path="${BASH_REMATCH[7]}"
	log d "URL='$url' SERVER='$server' TYPE='$type' PATH='$path'"

	# Bash has this really neat feature where it can open a TCP socket
	# directly.  bollux uses that feature here to ask the server for the
	# resource and then `passthru' it to the next thing.
	exec 9<>"/dev/tcp/$server/$port"
	printf '%s\r\n' "$path" >&9
	passthru <&9
}

# Handle a server response.
gopher_response() { # gopher_response URL
	local url="$1" pre=false
	# [7] Section 2.1
	#
	# Note that this duplicates the code in `gopher_request'.  There might
	# be a good way to thread this data through so that it's not computed
	# twice.
	[[ "$url" =~ gopher://([^/?#:]*)(:([0-9]+))?(/((.))?(/?.*))?$ ]]
	local cur_server="${BASH_REMATCH[1]}"
	local type="${BASH_REMATCH[6]:-1}"

	run history_append "$url" "" # gopher doesn't really have titles, huh

	# Gopher has a concept of 'line types', or maybe 'item types' --
	# basically, each line in a gophermap starts with a character, its type,
	# and then is followed by a series of tab-separated fields describing
	# where that type is and how to display it.  The full list of original
	# line types can be found in [6] Section 3.8, though the types have also been
	# extended over the years.  Since bollux can only display types that are
	# text-ish, it only concerns itself with those in this case statement.
	# All the others are simply downloaded.
	case "$type" in
	0) # Item is a file
		# Since gopher doesn't send MIME-type information in-band, we
		# just assume it's text/plain, and try to convert it later to
		# UTF-8 with `iconv'.
		run display text/plain
		;;
	1) # Item is a directory [gophermap]
		# Since I've already written all the code to typeset gemini
		# well, it's easy to convert a gophermap to text/gemini and
		# display it than to write a whole new gophermap typesetter.
		run gopher_convert | run display text/gemini
		;;
	3) # Error
		# I don't know all the gopher error cases, and the spec is
		# pretty quiet on them.  So bollux just signals failure and
		# bails.
		die 203 "GOPHER: failed"
		;;
	7) # Item is an Index-Search server
		# Gopher search queries are separated from their resources by a
		# TAB.  It's wild.
		if [[ "$url" =~ $'\t' ]]; then
			run gopher_convert | run display text/gemini
		else
			run prompt 'SEARCH'
			run blastoff "$url	$REPLY"
		fi
		;;
	*) # Anything else
		# The list at [6] Section 3.8 includes the following (noted where it
		# might be good to differently handle them in the future):
		#
		# 2. Item is a CSO phone-book server            *****
		# 4. Item is a BinHexed Macintosh file
		# 5. Item is DOS binary archive of some sort
		# 6. Item is a UNIX uuencoded file
		# 8. Item points to a text-based telnet session *****
		# 9. Item is a binary file! [exclamation point sic. -- ed.]
		# +. Item is a redundant server                 *****
		# T. Item points to a text-based tn3270 session
		# g. Item is a GIF format graphics file
		# I. Item is some kind of image file
		#
		# As mentioned, there are other line types floating around as
		# well.  Since I don't browse gopher much, there's not much
		# personal motivation to extend `gopher_response'; however pull
		# requests are always welcome.
		run download "$url"
		;;
	esac
}

# Convert a gophermap naively to a gemini page.
#
# Based strongly on [8] but bash-ified.  Due to the properties of link lines in
# gemini, many of the item types in `gemini_reponse' can be linked to the proper
# protocol handlers here -- so if a user is trying to reach a TCP link through
# gopher, bollux won't have to handle it, for example.*
#
# * Ideally -- right now, bollux simply errors out on all unknown protocols.
#   More research needs to be done into how to farm out to `xdg-open' or a
#   similar generic opener.
gopher_convert() {
	local type label path server port regex
	while IFS= read -r; do
		printf -v regex '(.)([^\t]*)(\t([^\t]*)\t([^\t]*)\t([^\t]*))?'
		if [[ "$REPLY" =~ $regex ]]; then
			type="${BASH_REMATCH[1]}"
			label="${BASH_REMATCH[2]}"
			path="${BASH_REMATCH[4]:-/}"
			server="${BASH_REMATCH[5]:-$cur_server}"
			port="${BASH_REMATCH[6]}"
		else
			log e "CAN'T PARSE LINE"
			printf '%s\n' "$REPLY"
			continue
		fi
		case "$type" in
		.) # end of file
			printf '.\n'
			break
			;;
		i) # label
			case "$label" in
			'#'* | '*'[[:space:]]*)
				if $pre; then
					printf '%s\n' '```'
					pre=false
				fi
				;;
			*)
				if ! $pre; then
					printf '%s\n' '```'
					pre=true
				fi
				;;
			esac
			printf '%s\n' "$label"
			;;
		h) # html link
			if $pre; then
				printf '%s\n' '```'
				pre=false
			fi
			printf '=> %s %s\n' "${path:4}" "$label"
			;;
		T) # telnet link
			if $pre; then
				printf '%s\n' '```'
				pre=false
			fi
			printf '=> telnet://%s:%s/%s%s %s\n' \
				"$server" "$port" "$type" "$path" "$label"
			;;
		*) # other type
			if $pre; then
				printf '%s\n' '```'
				pre=false
			fi
			printf '=> gopher://%s:%s/%s%s %s\n' \
				"$server" "$port" "$type" "$path" "$label"
			;;
		esac
	done
	if $pre; then
		printf '%s\n' '```'
	fi
	# close the connection
	exec 9<&-
	exec 9>&-
}

# HANDLING CONTENT #############################################################
#
# After fetching the resource requested by the user, bollux needs to display or
# otherwise 'give' the resource to the user for consumption.
#
################################################################################

# display the fetched content
display() { # display METADATA [TITLE]
	local -a less_cmd
	local mime charset

	# split header line
	local -a hdr
	IFS=';' read -ra hdr <<<"$1"
	# title is optional but nice looking
	local title
	if (($# == 2)); then
		title="$2"
	fi

	mime="$(trim_string "${hdr[0],,}")"
	for ((i = 1; i <= "${#hdr[@]}"; i++)); do
		h="${hdr[$i]}"
		case "$h" in
		*charset=*) charset="${h#*=}" ;;
		esac
	done

	[[ -z "$mime" ]] && mime="text/gemini"
	[[ -z "$charset" ]] && charset="utf-8"

	log debug "mime='$mime'; charset='$charset'"

	case "$mime" in
	text/*)
		set_title "$title${title:+ - }bollux"
		# Build the `less' command
		less_cmd=(less)
		# Render ANSI color escapes ONLY (as opposed to `-r', which
		# renders all escapes)
		less_cmd+=(-R)
		# Don't wrap text.  `fold_line' takes care of wrapping normal
		# text, and pre-formatted text shouldn't wrap.
		less_cmd+=(-S)
		# Load the keybindings (see `lesskey').
		mklesskey && less_cmd+=(-k "$BOLLUX_LESSKEY")
		local helpline="${KEY_OPEN}:open, "
		helpline+="${KEY_GOTO}/"
		helpline+="${KEY_GOTO_FROM}:goto, "
		helpline+="${KEY_BACK}:back, "
		helpline+="${KEY_FORWARD}:forward, "
		helpline+="${KEY_REFRESH}:refresh"
		less_cmd+=(
			# 'status'line
			-Pm"$(less_prompt_escape "$BOLLUX_URL") - bollux$"
			# helpline
			-P="$(less_prompt_escape "$helpline")$"
			# start with statusline
			-m
			# float content to the top
			+k
		)

		local typeset
		local submime="${mime#*/}"
		if declare -Fp "typeset_$submime" &>/dev/null; then
			typeset="typeset_$submime"
		else
			typeset="passthru"
		fi

		{
			run iconv -f "${charset^^}" -t "UTF-8" |
				run tee "$BOLLUX_PAGESRC" |
				run "$typeset" | #cat
				run "${less_cmd[@]}" && bollux_quit
		} || run handle_keypress "$?"
		;;
	*) run download "$BOLLUX_URL" ;;
	esac
}

# escape strings for the less prompt
less_prompt_escape() { # less_prompt_escape STRING
	local i
	for ((i = 0; i < ${#1}; i++)); do
		: "${1:i:1}"
		case "$_" in
		[\?:\.%\\]) printf '\%s' "$_" ;;
		*) printf '%s' "$_" ;;
		esac
	done
	printf '\n'
}

## Generate a lesskey(1) file for custom keybinds
# After less 582, less itself can read lesskey configuration files, rendering
# the lesskey *program* deprecated.  The exact message is, apparently, this:
#
#    NOTE: lesskey is deprecated.
#         It is no longer necessary to run lesskey,
#         when using less version 582 and later.
#
# Now I don't have less 582 available on my machine (Debian of course!), so I'm
# relying on a report from 'bencollver' on tildegit.  (Thanks for the report,
# ben!)
#
# That being said, this may not work.  *Please test!* --- acdw 2022-08-09
#
# PS.  Here's a link to less's homepage in case something else comes up:
# https://www.greenwoodsoftware.com/less/
mklesskey() { # mklesskey
	if [[ -f "$BOLLUX_CUSTOM_LESSKEY" ]]; then
		log d "Using custom lesskey: '$BOLLUX_CUSTOM_LESSKEY'"
		BOLLUX_LESSKEY="${BOLLUX_CUSTOM_LESSKEY}"
		return
	fi

	less_version="$(less --version | awk '{print $2;exit;}')"
	lesskey_ft="$(file -i "$BOLUX_LESSKEY")"
	lesskey_make=false

	if [[ "$lesskey_ft" =~ .*application.* && less_version -lt 582 ]] ||
		[[ "$lesskey_ft" =~ .*text.* && less_version -ge 582 ]]; then
		mv "$BOLLUX_LESSKEY" "${BOLLUX_LESSKEY}.bak"
		log e "Moved incompatible lesskey '$BOLLUX_LESSKEY' to '${BOLLUX_LESSKEY}.bak'."
		lesskey_make=true
	fi

	if [[ ! -f "$BOLLUX_LESSKEY" ]]; then
		lesskey_make=true
	fi

	if "$lesskey_make"; then
		log d "Generating lesskey..."
		cat >/tmp/bollux_lesskey <<-EOF
			#command
			${KEY_OPEN} quit 0 # 48 open a link
			${KEY_GOTO} quit 1 # 49 goto a url
			${KEY_BACK} quit 2 # 50 back
			${KEY_FORWARD} quit 3 # 51 forward
			${KEY_REFRESH} quit 4 # 52 re-request / download
			${KEY_GOTO_FROM} quit 5 # 53 goto a url (pre-filled)
			${KEY_CYCLE_PRE} quit 6 # 54 cycle T_PRE_DISPLAY and refresh
			# other keybinds
			\\40 forw-screen-force
			h left-scroll
			l right-scroll
			? status   # 'status' will show a little help thing.
			= noaction
		EOF
		if ((less_version >= 582)); then
			mv /tmp/bollux_lesskey "$BOLLUX_LESSKEY"
		else
			lesskey -o "$BOLLUX_LESSKEY" /tmp/bollux_lesskey
		fi
	else
		log d "Lesskey found: $BOLLUX_LESSKEY"
	fi
}

# typeset a text/gemini document
typeset_gemini() {
	local pre=false
	local ln=0 # link number

	if ((T_WIDTH == 0)); then
		shopt -s checkwinsize
		(
			:
			:
		) # dumb formatting brought to you by shfmt
		log d "LINES=$LINES; COLUMNS=$COLUMNS"
		T_WIDTH=$COLUMNS
	fi
	WIDTH=$((T_WIDTH - T_MARGIN))
	((WIDTH < 0)) && WIDTH=80  # default if dumb
	S_MARGIN=$((T_MARGIN - 1)) # spacing

	log d "T_WIDTH=$T_WIDTH"
	log d "WIDTH=$WIDTH"
	log d "$T_PRE_DISPLAY"

	while IFS= read -r; do
		case "$REPLY" in
		'```'*)
			PRE_LINE_FORCE=false
			if $pre; then
				pre=false
			else
				pre=true
			fi
			case "${T_PRE_DISPLAY%%,*}" in
			pre)
				:
				;;
			alt | both)
				$pre && PRE_LINE_FORCE=true \
					gemini_pre "${REPLY#\`\`\`}"
				;;
			esac
			continue
			;;
		'=>'*)
			: $((ln += 1))
			gemini_link "$REPLY" $pre "$ln"
			;;
		'#'*) gemini_header "$REPLY" $pre ;;
		'*'[[:space:]]*)
			gemini_list "$REPLY" $pre
			;;
		'>'*)
			gemini_quote "$REPLY" $pre
			;;
		*) gemini_text "$REPLY" $pre ;;
		esac
	done
}

gemini_link() {
	local re="^(=>)[[:blank:]]*([^[:blank:]]+)[[:blank:]]*(.*)"
	local s t a # sigil, text, annotation(url)
	local ln="$3"
	if ! ${2-false} && [[ "$1" =~ $re ]]; then
		s="${BASH_REMATCH[1]}"
		a="${BASH_REMATCH[2]}"
		t="${BASH_REMATCH[3]}"
		if [[ -z "$t" ]]; then
			t="$a"
			a=
		fi

		printf "\e[${C_SIGIL}m%${S_MARGIN}s ${C_RESET}" "$s"
		printf "\e[${C_LINK_NUMBER}m[%d]${C_RESET} " "$ln"
		fold_line -n -B "\e[${C_LINK_TITLE}m" -A "${C_RESET}" \
			-l "$((${#ln} + 3))" -m "${T_MARGIN}" \
			"$WIDTH" "$(trim_string "$t")"
		fold_line -B " \e[${C_LINK_URL}m" \
			-A "${C_RESET}" \
			-l "$((${#ln} + 3 + ${#t}))" \
			-m "$((T_MARGIN + ${#ln} + 2))" \
			"$WIDTH" "$a"
	else
		gemini_pre "$1"
	fi
}

gemini_header() {
	local re="^(#+)[[:blank:]]*(.*)"
	local s t a # sigil, text, annotation(lvl)
	if ! ${2-false} && [[ "$1" =~ $re ]]; then
		s="${BASH_REMATCH[1]}"
		a="${#BASH_REMATCH[1]}"
		t="${BASH_REMATCH[2]}"
		local hdrfmt
		hdrfmt="$(eval echo "\$C_HEADER$a")"

		printf "\e[${C_SIGIL}m%${S_MARGIN}s ${C_RESET}" "$s"
		fold_line -B "\e[${hdrfmt}m" -A "${C_RESET}" -m "${T_MARGIN}" \
			"$WIDTH" "$t"
	else
		gemini_pre "$1"
	fi
}

gemini_list() {
	local re="^(\*)[[:blank:]]*(.*)"
	local s t # sigil, text
	if ! ${2-false} && [[ "$1" =~ $re ]]; then
		s="${BASH_REMATCH[1]}"
		t="${BASH_REMATCH[2]}"

		printf "\e[${C_SIGIL}m%${S_MARGIN}s ${C_RESET}" "$s"
		fold_line -B "\e[${C_LIST}m" -A "${C_RESET}" -m "$T_MARGIN" \
			"$WIDTH" "$t"
	else
		gemini_pre "$1"
	fi
}

gemini_quote() {
	local re="^(>)[[:blank:]]*(.*)"
	local s t # sigil, text
	if ! ${2-false} && [[ "$1" =~ $re ]]; then
		s="${BASH_REMATCH[1]}"
		t="${BASH_REMATCH[2]}"

		printf "\e[${C_SIGIL}m%${S_MARGIN}s ${C_RESET}" "$s"
		fold_line -B "\e[${C_QUOTE}m" -A "${C_RESET}" -m "$T_MARGIN" \
			"$WIDTH" "$t"
	else
		gemini_pre "$1"
	fi
}

gemini_text() {
	if ! ${2-false}; then
		printf "%${S_MARGIN}s " ' '
		fold_line -m "$T_MARGIN" \
			"$WIDTH" "$1"
	else
		gemini_pre "$1"
	fi
}

gemini_pre() {
	# Print preformatted text, dependent on $T_PRE_DISPLAY and
	# $PRE_LINE_FORCE
	if [[ alt != "${T_PRE_DISPLAY%%,*}" ]] || $PRE_LINE_FORCE; then
		printf "\e[${C_SIGIL}m%${S_MARGIN}s " '```'
		printf "\e[${C_PRE}m%s${C_RESET}\n" "$1"
	fi
}

# wrap lines on words to WIDTH
fold_line() { # fold_line [OPTIONS...] WIDTH TEXT
	# see getopts, below, for options
	local newline=true
	local -i margin_all=0 margin_first=0 width ll=0 wl=0 wn=0
	local before="" after=""
	OPTIND=0
	while getopts nm:f:l:B:A: OPT; do
		case "$OPT" in
		n) # -n = no trailing newline
			newline=false
			;;
		m) # -m MARGIN = margin for all lines
			margin_all="$OPTARG"
			;;
		f) # -f MARGIN = margin for first line
			margin_first="$OPTARG"
			;;
		l) # -l LENGTH = length of line before starting fold
			ll="$OPTARG"
			;;
		B) # -B BEFORE = text to insert before each line
			before="$OPTARG"
			;;
		A) # -A AFTER = text to insert after each line
			after="$OPTARG"
			;;
		*) return 1 ;;
		esac
	done
	shift "$((OPTIND - 1))"
	width="$1"
	ll=$((ll % width))
	#shellcheck disable=2086
	set -- $2

	local plain=""
	if ((margin_first > 0 && ll == 0)); then
		printf "%${margin_first}s" " "
	fi
	if [[ -n "$before" ]]; then
		printf '%b' "$before"
	fi
	for word; do
		((wn += 1))
		shopt -s extglob
		plain="${word//$'\x1b'\[*([0-9;])m/}"
		shopt -u extglob
		wl=$((${#plain} + 1))
		if (((ll + wl) >= width)); then
			printf "${after:-}\n%${margin_all}s${before:-}" ' '
			ll=$wl
		else
			((ll += wl))
		fi
		printf '%s' "$word"
		((wn != $#)) && printf ' '
	done
	[[ -n "$after" ]] && printf '%b' "$after"
	$newline && printf '\n'
}

# use the exit code from less (see mklesskey) to do things
handle_keypress() { # handle_keypress CODE
	case "$1" in
	48) # o - open a link -- show a menu of links on the page
		run select_url "$BOLLUX_PAGESRC"
		;;
	49) # g - goto a url -- input a new url
		prompt GO
		run blastoff -u "$REPLY"
		;;
	50) # [ - back in the history
		run history_back || {
			sleep 0.5
			run blastoff "$BOLLUX_URL"
		}
		;;
	51) # ] - forward in the history
		run history_forward || {
			sleep 0.5
			run blastoff "$BOLLUX_URL"
		}
		;;
	52) # r - re-request the current resource
		run blastoff "$BOLLUX_URL"
		;;
	53) # G - goto a url (pre-filled with current)
		run prompt -u GO
		run blastoff -u "$REPLY"
		;;
	54) # ` - change alt-text visibility and refresh
		run list_cycle T_PRE_DISPLAY ,
		run blastoff "$BOLLUX_URL"
		;;
	55) # 55-57 -- still available for binding
		die "$?" "less(1) error"
		;;
	esac
}

# select a URL from a text/gemini file
select_url() { # select_url FILE
	run mapfile -t < <(extract_links <"$1")
	if ((${#MAPFILE[@]} == 0)); then
		log e "No links on this page!"
		sleep 0.5
		run blastoff "$BOLLUX_URL"
	fi
	PS3="OPEN> "
	select u in "${MAPFILE[@]}"; do
		case "$REPLY" in
		q) bollux_quit ;;
		[^0-9]*) run blastoff -u "$REPLY" && break ;;
		esac
		run blastoff "${u%%[[:space:]]*}" && break
	done </dev/tty
}

# extract the links from a text/gemini file
extract_links() {
	local url alt
	local re="^=>[[:space:]]*([^[:space:]]+)([[:space:]]+(.*))?$"
	while read -r; do
		log d "$re"
		if [[ $REPLY =~ $re ]]; then
			url="${BASH_REMATCH[1]}"
			alt="${BASH_REMATCH[3]}"

			if [[ "$alt" ]]; then
				printf '%s \e[34m(%s)\e[0m\n' "$url" "$alt"
			else
				printf '%s\n' "$url"
			fi
		fi
	done
}

# Download a file.
#
# Any non-otherwise-handled MIME type will be downloaded using this function.
# It uses 'dd' to download the resource to a temporary file, then attempts to
# move it to $BOLLUX_DOWNDIR (by default, $PWD).  If that's not possible (either
# because the target file already exists or the 'mv' invocation fails for some
# reason), `download' logs the error and alerts the user where the temporary
# file is saved.
#
# `download' works by reading the end of the pipe from `display', which means
# that sometimes, due to something with the way bash or while or ... something
# ... chunks the data, sometimes binary data gets corrupted.  This is an area
# that requires more research.  UPDATE 2022-06-08: White_Rabbit has figured out
# solution!  From their email:
#
# > by the time we're ready to save a non-text/* resource, it's already
# > corrupted beyond repair. One possibile solution, attached, is to request it
# > again, presume the reply is 20 and save the data to the filesystem. What do
# > you think?
#
# I think this is great, thanks!!!
download() {
	# The binary file has been corrupted by normalize, which strips 0x0d
	# bytes. Something also drops NULL bytes. So, we'll discard this data
	cat >/dev/null
	# Now it's time to re-download the binary file
	temp_data="$(mktemp)"
	log x "Downloading: '$BOLLUX_URL' => '$temp_data'..."
	gemini_request "$BOLLUX_URL" | dd status=progress >"$temp_data"

	# Now $temp_data holds both the header and the data
	HEADER=$(head -1 "$temp_data")
	# To get the header length we use ${#HEADER} syntax, but this gives
	# a bad value because it doesn't count the last byte 0x0A.
	# We sum 2 because tail wants the first useful byte.
	let FIRST_BYTE=$((${#HEADER} + 2))
	temp_name="$(mktemp)"
	if tail --bytes=+$FIRST_BYTE "$temp_data" >"$temp_name"; then
		rm "$temp_data"
	else
		log error "Error removing the header from '$temp_data'."
	fi

	final_name="$BOLLUX_DOWNDIR/${BOLLUX_URL##*/}"
	if [[ -f "$final_name" ]]; then
		log x "Saved '$temp_name'."
	elif mv "$temp_name" "$final_name"; then
		log x "Saved '$final_name'."
	else
		log error "Error saving '$final_name': downloaded to '$temp_name'."
	fi
}

# HISTORY #####################################################################
#
# While bollux saves history to a file ($BOLLUX_HISTFILE), it doesn't /do/
# anything with the history that's been saved.  When I do implement the history
# functionality, it'll probably be on top of a file:// protocol, which will make
# it very simple to also implement bookmarks and the previewing of pages.  In
# fact, I should be able to implement this change by the weekend (2021-03-07).
#
###############################################################################

# Append a URL to history.
history_append() { # history_append URL TITLE
	local url="$1"
	local title="$2"

	# Print the URL and its title (if given) to $BOLLUX_HISTFILE.
	local fmt=''
	fmt+='%(%FT%T)T\t' # %(_)T calls directly to 'strftime'.
	if (($# == 2)); then
		fmt+='%s\t' # $url
		fmt+='%s\n' # $title
	else
		fmt+='%s%s\n' # printf needs a field for every argument.
	fi
	run printf -- "$fmt" -1 "$url" "$title" >>"$BOLLUX_HISTFILE"

	# Add the URL to the HISTORY array and increment the pointer.
	HISTORY[$HN]="$url"
	((HN += 1))

	# Update $BOLLUX_URL.
	BOLLUX_URL="$url"
}

# Move back in session history.
history_back() {
	log d "HN=$HN"
	# We need to subtract 2 from HN because it automatically increases by
	# one with each call to `history_append'.  If we subtract 1, we'll just
	# be at the end of the array again, reloading the page.
	((HN -= 2))

	if ((HN < 0)); then
		HN=0
		log e "Beginning of history."
		return 1
	fi

	run blastoff "${HISTORY[$HN]}"
}

# Move forward in session history.
history_forward() {
	log d "HN=$HN"

	if ((HN >= ${#HISTORY[@]})); then
		HN="${#HISTORY[@]}"
		log e "End of history."
		return 1
	fi

	run blastoff "${HISTORY[$HN]}"
}

# Load a URL.
#
# I was feeling fancy when I named this function -- a more descriptive name
# would be 'bollux_goto' or something.
blastoff() { # blastoff [-u] URL
	local u

	# `blastoff' assumes a "well-formed" URL by default -- i.e., a URL with
	# a protocol string and no extraneous whitespace.  Since bollux can't
	# trust the user to input a proper URL at a prompt, nor capsule authors
	# to fully-form their URLs, so the -u flag is necessary for those
	# use-cases.  Otherwise, bollux knows the URL is well-formed -- or
	# should be, due to the Gemini specification.
	if [[ "$1" == "-u" ]]; then
		u="$(run uwellform "$2")"
	else
		u="$1"
	fi

	# After ensuring the URL is well-formed, `blastoff' needs to transform
	# it according to the transform rules of RFC 3986 (see Section 5.2.2), which
	# turns relative references into absolute references that bollux can use
	# in its request to the server.  That's followed by a check that the
	# protocol is set, defaulting to Gemini if it isn't.
	#
	# Implementation detail: because Bash is really stupid when it comes to
	# arrays, the URL functions u* (see below) work with an array defined
	# with `local -a' and passed by name, not by value.  Thus, the
	# `utransform url ...' instead of `urltransform "${url[@]}"' or
	# similar.  In addition, the `ucdef' and `ucset' functions take the name
	# of the array element as parameters, not the element itself.
	local -a url
	run utransform url "$BOLLUX_URL" "$u"
	if ! ucdef url[1]; then
		run ucset url[1] "$BOLLUX_PROTO"
	fi

	# To try and keep `bollux' as extensible as possible, I've written it
	# only to expect two functions for every protocol it supports:
	# `x_request' and `x_response', where `x' is the name of the protocol
	# (the first element of the built `url' array).  `declare -F' looks only
	# for functions in the current scope, failing if it doesn't exist.
	#
	# In between `x_request' and `x_response', `blastoff' normalizes the
	# line endings to UNIX-style (LF) for ease of display.
	{
		if declare -F "${url[1]}_request" >/dev/null 2>&1; then
			run "${url[1]}_request" "$url"
		else
			die 99 "No request handler for '${url[1]}'"
		fi
	} | run normalize | {
		if declare -F "${url[1]}_response" >/dev/null 2>&1; then
			run "${url[1]}_response" "$url"
		else
			log d \
				"No response handler for '${url[1]}';" \
				" passing thru"
			passthru
		fi
	}
}

# $BASH_SOURCE is an array that stores the "stack" of source calls in bash.  If
# the first element of that array is "bollux", that means the user called this
# script, instead of sourcing it.  In that case, and ONLY in that case, should
# bollux actually enter the main loop of the program.  Otherwise, allow the
# sourcing environment to simply source this script.
#
# This is basically the equivalent of python's 'if __name__ == "__main__":'
# block.
if [[ "${BASH_SOURCE[0]}" == "$0" ]]; then
	${DEBUG:-false} && set -x
	run bollux "$@"
fi